Financial News

2017

05.05.2017 | Successful First Quarter 2017 for SCHWEIZER

  • Turnover increases by 14.9 percent
  • EBITDA jumps by 59 percent
  • Order income increases by 8.2 percent

Schramberg, May 5, 2017 – SCHWEIZER Group managed a very good start into the new Fiscal Year. In the first quarter 2017 the company reported a year-on-year turnover increase of 14.9 percent to 32.4 million euro (2016: 28.2 million euro). The group’s EBITDA (earnings before interest, taxes, depreciation and amortisation) jumped by 59 percent to 3.5 million euro compared to 2.2 million euro in Q1 2016. An improved gross margin of last year’s complex product startups and the high turnover contributed substantially to the EBITDA margin of 10.7 percent (2016: 7.8 percent). The EBIT (earnings before interest and taxes) increased to 1.5 million euro (2016: 0.5 million euro), corresponding to an EBIT margin of 4.5 percent (2016: 1.8 percent).

Turnover increases could be realised with all customer groups, but the automotive customers continue to represent the biggest part. Sales with these customers increased by 11 percent to 23.1 million euro (2016: 20.8 million euro). Turnover development with customers from the field of industrial electronics was also gratifying, with sales increasing by 26.9 percent to 6.7 million euro (2016: 5.3 million euro). With a view to the regional allocation, Germany showed a slightly underproportionate turnover increase of 12.5 percent to 19.0 million euro. Consequently, the export ratio increased to 41.4 percent. Exports went in particular to the European countries, but America and Asia Pacific also came up with above-average growth rates. The turnover share of SCHWEIZER’s high technology products increased again in the first quarter, accounting for 57 percent of total turnover (2016: 54 percent). Incoming orders rose by 8.2 percent to 31.7 million euro (2016: 29.3 million euro), the order book amounted to 157.5 million euro at the end of the first quarter 2017 (2016: 150.0 million euro).

SCHWEIZER’s equity capital increased to 65.9 million euro (Dec 31, 2016: 64.8 million euro), which corresponds to an equity ratio of 53.8 percent (Dec 31, 2016: 55.1 percent), net gearing was 0.9 percent compared to -1.5 percent at the end of the year 2016.

Outlook
“The first quarter exceeded our expectations concerning turnover and operative results. Based on our order book we continue to strive for a 2 to 4 percent turnover growth this year compared to 2016, which corresponds to a turnover of about 120 million euro. Considering the successful first quarter we currently expect our EBITDA to be on the upper end of the forecasted 8 to 9 percent EBITDA range”, says Marc Bunz, Chief Financial Officer of Schweizer Electronic AG. “However, one cannot rule out the possibility that the current development of copper prices and the international shortages and price increases for copper foils and laminates might burden the turnover and the results. We are pleased to say that we do not face any shortages at the moment”.

28.04.2017 | SCHWEIZER confirms slight turnover increase in Fiscal Year 2016

  • Expansion of customer portfolio and sales basis
  • Order book increases to 158.4 million euro
  • Dividend stable at 0.65 euro

Schramberg, April 28, 2017 – Schweizer Group closed the accounts in 2016 with a slight turnover increase of 0.5% to 116.1 million euro (2015: 115.6 million euro) and 9.5 million euro EBITDA according to IFRS (earnings before interest, taxes, depreciation and amortisation) against 11.4 million euro the year before. The EBITDA margin comes to 8.2% in 2016 compared to 9.8% in 2015. The EBIT (earnings before interest and taxes) amounts to 1.8 million euro (2015: 3.7 million euro), corresponding to an EBIT margin of 1.6% (2015: 3.2%). On occasion of the forthcoming Annual General Meeting, SCHWEIZER’s Supervisory and Executive Boards will suggest a dividend of 0.65 euro.

Substantial new product startups with a lower rate of return in the ramp-up phase, disproportionally increasing personal cost as well as a comprehensive investment programme burdened the year end result, which decreased to 0.6 million euro in 2016 (2015: 1.5 million euro). Investments into fixed assets and software alone amounted to 7.3 million euro in 2016 compared to 4.2 million euro in 2015. A strong emphasis of these investments was on the elimination of bottlenecks, which had occurred due to the increasing technology requirements of the product portfolio. Furthermore, a combined heat and power plant and a new telecommunication system were installed in 2016, with investments of 1.5 million euro and 0.2 million euro respectively.

SCHWEIZER’s turnover development is characterised by further successful business with the highly complex products of the company’s technology portfolio, making up 55% of the total turnover in the last fiscal year (2015: 52%). With 87.8 million euro sales in 2016, the automotive suppliers again constituted the largest customer sector, accounting for more than 75% of SCHWEIZER’s total turnover.

First orders to customers from the aviation sector were carried out in the last fiscal year, and this business is forecasted to grow considerably as the entire aviation sector expects disproportionately high market growth rates in the years to come. First successes triggered by expanded sales activities were visible in the increasing internationalisation of the sales markets, in particular through expanded turnover in China, South Korea and the Philippines, but also on the American Continent, where turnover has trippled to 12.6 million euro since 2014. The order book climbed by 6.2% to 158.4 million euro in 2016 compared to 149.1 million euro in 2015. 

The company’s equity capital continues to stay on a high level, reflecting the group’s financial stability. The equity capital amounted to 64.8 million euro and corresponds to an equity ratio of 55.1%. Net gearing was -1.5 % compared to -5.1% in 2015.

 

Outlook for 2017

SCHWEIZER expects a predominantly positive development with technologically demanding products from the areas of system cost reduction and power electronics for applications in e-mobility, sensors for safety systems and autonomous driving. This means further growth with customers from the automotive sector. Considering the diversification strategy of the customer portfolio, further turnover increase is expected through aviation customers due to predatory competition. In addition, first sales are expected via the strategic partnership with WUS Printed Circuit (Kunshan) Co., Ltd., China in the field of high frequency applications.

“Our expectations are already covered primarily through our order book”, says Marc Bunz, Chief Financial Officer of Schweizer Electronic AG. “For 2017 we expect a slight turnover increase by 2 to 4% compared to 2016. The total amount of orders, destined for shipment in 2017, already came up to 108.2 million euro at the balance sheet date. We expect a slightly better year end result in 2017, striving for an EBITDA margin of again 8 to 9% of total turnover. This assumes that the proportion between turnover of our production in Schramberg and turnover achieved by our Asian partners shows no considerable shifts.”

The annual report for the year 2016 is available on http://www.schweizer.ag/de/investorrelations/finanzberichte.html.

An English version of this report will be available soon.

 

Key Figures Schweizer Group (IFRS)

in million euro

2016

2015

Change

Order income

125.4

145.5

-20.1

Order book

158.4

149.1

+9.3

Turnover

116.1

115.6

+0.5

EBITDA

9.5

11.4

-1.9

EBITDA margin (%)

8.2

9.8

 

EBIT

1.8

3.7

-1.9

EBIT margin (%)

1.6

3.2

 

Earnings after taxes

0.6

1.5

-0.9

13.04.2017 | Strategic Partner WUS increases stake into SCHWEIZER

Schramberg, April 13, 2017 – Following three years successful strategic partnership and co-operation in the High Frequency (HF) segment between WUS Printed Circuit (Kunshan) Co., Ltd. and Schweizer Electronic AG, Schramberg, the companies WUS Printed Circuit (Kunshan) Co., Ltd., China and WUS Printed Circuit Co., Ltd., Taiwan, acquired shares of SCHWEIZER by their respective subsidiaries as follows: WUS Printed Circuit (Kunshan) Co., Ltd. acquired 15.24% and now holds 19.74% of SCHWEIZER’s shares, WUS Printed Circuit Co., Ltd, Taiwan acquired 10.16 %. The equity stake was purchased from the share pool of the Gerhard Schweizer family line. Closing of these transactions is subject to the conditions precedent of antitrust approval.

WUS thus underpins its firm belief in SCHWEIZER’s technological competence and its strong interest in the company’s future prospects. This step further strengthens SCHWEIZER’s partner network.

WUS Printed Circuit (Kunshan) Co., Ltd has been engaged in the design and manufacturing of printed circuit boards since April 1992. Thanks to the teamwork and effort of all its stakeholders, WUS has become one of the leading brands in the PCB industry. Following its product differentiation strategy, WUS focuses on providing value to its customers through technology, quality and service. The company’s’ core products include high layer count PCBs for telecommunication and network equipment, automotive electronics, industrial automation controls and aviation electronics. With about 8,200 employees WUS achieved sales of 489 million euros in Fiscal Year 2016 ending December.

“Our partnership and cooperation with SCHWEIZER bear a win-win solution for both companies as well as for our customers in order to face our common challenges. Therefore we decided to buy the additonal equity stake allowing us to further participate in SCHWEIZER’s business results and to share risks as well as positive outcomes with our partner,” says Chris Wu, President of WUS Printed Circuit (Kunshan) Co., Ltd.

And he adds, "We believe in the coming decade, autopiloting and electrification of automobile will be among the key technologies that revolutionise people's way of living. In the past three years, through technology transfer and co-operation in HF PCBs for ADAS radar, both companies have built a solid foundation of mutual trust, understanding and respect. We are honoured to be invited to participate in this additional equity stake of 15.24% share transfer opportunities, and look forward to deeper co-operation to make these technologies available to more people in a much shorter time than we all expected."

Nicolas Schweizer, Chief Technology Officer of Schweizer Electronic AG, comments: “Only 3 years ago, in April 2014, SCHWEIZER and WUS agreed on their exclusive, long-term strategic partnership which allows us and our customers access to further HF production capacities in Asia. This was followed by WUS’ first investment into SCHWEIZER just 4 months later. Now, we are very pleased about this further capital transaction since it enhances WUS’ strong interest in exploiting the business opportunities on the global automotive market together with SCHWEIZER. As leading manufacturer of sensor and power PCB solutions especially requested for tomorrow’s autonomous cars and for e-mobility, we believe in the strong synergies resulting from the co-operation between our companies”.

07.04.2017 | 12:56 | Schweizer Electronic AG: Preliminary unaudited group figures for Fiscal Year 2016

Schramberg, April 7, 2017 – In the fiscal year 2016 turnover of SCHWEIZER group increased slightly to 116.1 million euro compared to 115.6 million euro in 2015. This development is characterised by further successful business with the highly complex products of SCHWEIZER’s technology portfolio, enabling in particular automotive customers to realise solutions for sensors, LED technologies and electro mobility.

Preliminary, unaudited figures reveal a group EBITDA (Earnings before Interest, Tax, Depreciation and Amortisation) according to IFRS of 9.5 million euro (2015: 11.4 million euro). This corresponds to an EBITDA ratio of 8.2%, which is below the envisaged range of between 9 to 10%. The expected group EBIT amounted to 1.8 million euro (2015: 3.7 million), corresponding to a ratio of 1.6% (2015: 3.2%). The result was burdened by substantial product ramp-ups, showing a lower rate of return in the ramp-up phase, by disproportionally increasing personal cost as well as by a comprehensive investment programme totalling 8.8 million euro for new production technologies. The expected annual group result decreased to 0.6 million euro (2015: 1.5 million euro).

Based on the expected annual result of the mother company Schweizer Electronic AG according to HGB standards, SCHWEIZER’s Executive Board recommends to the Supervisory Board to propose a dividend of 0.65 euro per share on occasion of the forthcoming Annual General Meeting on July 7, 2017.

Final, audited figures for the business year 2016 will be disclosed on April 28, 2017.

2016

30.11.2016 | Schweizer Electronic AG: Executive Board complete again

Schramberg, November 30, 2016 – Schweizer Electronic announces that its Executive Board is complete again with immediate effect. Thus, Dr. Maren Schweizer, Chief Executive Officer of Schweizer Electronic AG, has reassumed her responsibility for the business units Operations, Sales & Marketing, Global Supply Chain and Systems. Nicolas Schweizer, Deputy Chairman of the Executive Board, has been back to the office since November 7, responsible for the business units Technology, Human Resources, Legal and Communication. Marc Bunz, Chief Financial Officer at SCHWEIZER, who in the meantime has managed all areas of responsibility on an interim basis, is now able again to dedicate his time entirely to the areas Finance & Controlling, Purchasing, IT and Investor Relations.

04.11.2016 | Schweizer Electronic presents third quarter figures and reports increasing achievements in the automotive sector and export business

Schramberg, November 04, 2016 – The successful business development with automotive customers led to an increase of 2.1% to 29.1 million Euro in SCHWEIZER’s third quarter turnover (previous year 28.5 million Euro). Sales with this customer segment alone grew by 12.1% to 22.3 million Euro against 19.9 million Euro the year before. The EBITDA (earnings before interest, taxes, depreciation and amortisation) reached the target with a total of 2.9 million Euro, and the margin of 10% was above this year’s half year-level of 7.9%, but fell slightly behind last year’s third quarter-margin of 12.0 % (3.4 million Euro). The EBIT (earnings before interest and taxes) amounted to 0.9 million Euro (2015: 1.5 million Euro).

Power electronics products showed an outstanding 20%-sales increase in the automotive sector. They are necessary to construct reliable solutions in e-mobility applications, where the effective management of high temperatures and high currents has to be ensured. While the turnover share of the industry sector declined from 21.1% to 16.5%, initial sales could be realised with aviation customers, letting SCHWEIZER report first achievements as regards the envisaged expansion of its customer portfolio. While turnover in Asia doubled to 2.6 million Euro, figures in the European region slightly declined from 24.2 million Euro in 2015 to 23.5 million Euro this year. SCHWEIZER’s export ratio, however, increased to 41%. The company’s order book grew by 45 million Euro (34%) against last year’s third quarter to a total amount of 177.5 million Euro.
 

Outlook

“Our EBITDA ratio has reached 8.6% in the first nine months of 2016. Currently, we expect our fourth quarter results to be on a similar level as in the third quarter, presuming that no unforeseen factors occur, which will either burden or benefit the results. This means, we could close our accounts of 2016 with an EBITDA ratio of between 9% and 10%, coming up to our forecast from August this year. Due to delays in the Vietnam ramp-up and at WUS, Kunshan, however, we expect our turnover to stay stable, which is in contrast to our August forecast of a 2%-increase”, comments Marc Bunz, Chief Financial Officer at Schweizer Electronic AG.

10.08.2016 | SCHWEIZER again with record order income in the first half year 2016

Order book increased by 44% to 175.6 million Euro
• Slight seasonal turnover decline by 3%
• Investments of 5.3 million Euro at the Schramberg production site

Schramberg, August 10, 2016 – The SCHWEIZER group again reported a record order income in the first half year 2016 so that the order book achieved a new peak at 175.6 million Euro. Orders for the Asian partners climbed by 56% to 27.2 million Euro, the order book at the Schramberg production site jumped by 42% to 148.4 million Euro. Despite the increasing order income, the turnover decreased slightly by 3.3% compared to previous year’s period and amounted to 58.0 million Euro. Such a fluctuation, however, is not unusual and is rather a seasonal phenomenon than a shift of the basic direction.

Due to the slight turnover decline, the EBITDA (earnings before interest, taxes, depreciation and amortisation) decreased by 0.2 million Euro to 4.6 million Euro. The EBIT (earnings before interest and taxes) amounted to 0.9 million Euro (2015: 1.0 million Euro). The financial development at SCHWEIZER continues to remain stable, the balance sheet indicators stay on a high level. In the first half year, the company invested 5.3 million Euro at the production site in Schramberg, with a focus on the new combined heat and power plant as well as on technological investments in bottle neck areas. The equity capital declined slightly by 1% against the 2015 year end level to 66.4 million Euro, which is mainly caused by a profit-neutral allocation to pension provisions. Due to a slightly increased balance sheet total, the equity ratio declined to 54.8% against 56.5% on December 31, 2015. With a net gearing of –1.0% (December 31, 2015: -5.1%) SCHWEIZER disposes of a net asset.

The significant jump in order income reflects a progressively forward-looking ordering procedure of customers in particular in the automotive sector, which accounts for 77% of SCHWEIZER’s turnover volume. Germany remains the strongest market. Technologically advanced products and solutions increasingly continue to contribute to SCHWEIZER’s success with the power electronics technologies achieving a particular high growth rate of 31%.

Forecast
The economic environment as well as the growth forecasts have been overcast by the United Kingdom’s potential exit of the European Union. This is likely to affect the German and the European automotive industry as well. However, SCHWEIZER’s turnover and in particular the order book development of the first half year give reason to confirm the spring forecast of 2%  turnover increase for the total year 2016.

05.07.2016 | Schweizer Electronic AG: Dividend stable with 0.65 Euro

Schramberg, July 5, 2016 – Shareholders present at Schweizer Electronic AG’s 27th Annual Shareholders‘Meeting on July 1, 2016 followed the proposal submitted by the Executive and Supervisory Boards and agreed to pay a dividend of 0.65 Euro per share for the fiscal year 2015. This corresponds to a dividend ratio of 45% after allocation to the profit reserves. Thus, the dividend of Schweizer Electronic AG remains stable. Furthermore, SCHWEIZER again will have employees participate in the company’s success with a payout amounting to 500,000 Euro and this way expresses their appreciation for the outstanding contribution.

Beyond the proposal for paying a dividend, the plenum, which gathered in Rottweil, agreed to all other proposals with a vast majority. The proposals concern the acquirement of up to a total of 10% of the company’s own share capital, the procurement of newly approved capital of up to 50% of the share capital as well as the procurement of conditional capital with a maximum nominal value amount of 35 million Euro. With about 177 shareholders joining the meeting, 75% of the share capital was represented. In addition, about 50 guests were present.

In their speeches Nicolas Schweizer, Deputy CEO and Marc Bunz, CFO, reported on a successful business year, where SCHWEIZER managed again to grow by 4.8% thus bucking the trend of the world-wide market which declined by 3.7%. As already announced, sales increased to 115.6 million Euro. Growing disproportionately by 19% to a total amount of 60.3 million Euro, the products of SCHWEIZER’s innovative product portfolio were leading in the turnover development, accounting for more than 50% of the total turnover already. With an increase of 25% SCHWEIZER also achieved record growth rates in order income and in the order book. In addition, the company managed to expand its customer portfolio by entering the aviation sector: first serial orders will be delivered within the next weeks and new orders have already been received for coming business periods.

In 2015, SCHWEIZER reported its financial statements according to IFRS standards for the first time. EBIT after special effects amounted to 3.7 million Euro against 3.0 million Euro the year before. Before special effects, the EBIT amounted to 5.8 million Euro. The company continues to build on solid financial structures with an equity capital of 67.4 million Euro (equity ratio 56.5%) and a net gearing ratio of – 5.1%.

The Shareholders’ Meeting approved the actions of the Managing Board and the Supervisory Board for the year 2015 with a vast majority. The long-standing member Christoph Schweizer was re-elected into the Supervisory Board, Ms. Karin Sommermoser, CFO of Zumtobel AG, was elected as his personal substitute member. Simultaneously, Dr. Stephan Zizala, Vice President and General Manager Business Line Automotive Power at Infineon Technologies AG, Neubiberg, was elected member of the Supervisory Board.

Download

Image caption (from left to right): Nicolas Schweizer, Deputy Chief Executive Officer,
Marc Bunz, Chief Financial Officer, Schweizer Electronic AG. (Download in high resolution)

29.04.2016 | SCHWEIZER: Consolidated financial figures for 2015 confirmed and Preliminary figures for Q1/2016

  • Strong growth against the trend in 2015
    Dividend stable at 0.65 EUR
  • Record order book of 149.1 million euro in 2015 increases further to 150.0 million euro in Q1/2016

Schramberg, April 29, 2016 – Schweizer Group closed the accounts in 2015 with record sales of 115.6 million euro (2014: 110.2 million euro) and 11.4 million euro EBITDA (earnings before interest, taxes, depreciation and amortisation) against 11.2 million euro the year before. The EBITDA margin amounts to 9.8% in 2015 compared to 10.2% in 2014. Before special effects, triggered by one-time personnel expenses and negative exchange rate effects between the euro and the US dollar, the EBITDA amounted to 13.5 million euro (2014: 11.2 million euro). The EBIT (earnings before interest and taxes) inreased to 3.7 million euro (2014: 3.0 million euro). The EBIT before special effects came up to 5.8 million euro. On occasion of the forthcoming Annual General Meeting, SCHWEIZER’s Supervisory and Executive Boards will suggest a dividend of 0.65 euro.

With sales increasing by 4.8% SCHWEIZER once again managed to grow against the trend, while the global printed circuit board market shrank by 3.7% to 55.3 billion USD in 2015. The growth was primarily achieved through business successes in North- and Central America, where sales climbed to a total of 11.0 million euro. The production site in Schramberg contributed with record sales of 104.2 million euro, thus having increased by 10.1% in total since 2013 thanks to well-targeted investments in personnel and plant capacity. Business with the Asian partners jumped to 11.4 million euro during this period, corresponding to a growth of 75% in total.

The company continues to build on solid financial structures with an equity capital of 67.4 million euro (2014: 68.4 million euro) and an equity ratio of 56.5% (2014: 58.3%). Net gearing improved from -3.3% in 2014 to -5.1% in 2015.

Focus on high technology and expansion of customer portfolio

Highly innovative technology products in power electronics and system cost reduction increasingly make up the basis of SCHWEIZER’s success. Sales from these product areas increased overproportionally by 19% to 60.3 million euro (2014: 50.5 million euro). Furthermore, SCHWEIZER aims at expanding its customer portfolio in a targeted way. New orders worth 6.2 million euro have already been placed by customers from the aviation sector. 

The order book continues to increase in the first quarter

According to preliminary figures, the order book of 149.1 million euro continued to increase to a total of 150.0 million euro at the beginning of the new business year. Turnover amounted to 28.2 million euro against 30.9 million euro at the end of Q1/2015. The EBITDA came up to 2.2 million euro, corresponding to an EBITDA margin of 7.7%. The EBIT amounted to 0.5 million euro (EBIT margin 1.8%). With 55.4% the equity ratio almost remained stable compared to the end of 2015, and net gearing was -2.5%.

Outlook

With incoming orders increasing by 25% in 2015, SCHWEIZER’s order book had already achieved a record level of 149.1 million euro at the end of 2015 (2014: 119.2 million euro). The continuing growth in the first quarter of 2016 already demonstrates a good starting position for SCHWEIZER in  2016. Thanks to its customer portfolio and the very good technological position, SCHWEIZER expects to grow further in 2016. However, due to the slow printed circuit board market and the growing economic insecurity, growth will rather be on a level of 2%. Considering the moderate turnover growth and the elimination of one-time personnel expenses, the company expects the EBITDA margin to increase to 10% or slightly more. 

The annual report for the year 2015 is available on https://www.schweizer.ag/de/investorrelations/finanzberichte.html. An English version of this report will be available soon.

 

Key Figures Schweizer Group (IFRS)

in   million euro 2015 2014 Change
Order income 145.5 116.3 29.2
Order book 149.1 119.2 29.2
Revenues 115.6 110.2 5.4
EBITDA  11.4 11.2 0.2
EBITDA margin (%) 9.8 10.2  
EBITDA before special effects 13.5 11.2 2.3
EBITDA margin before special effects (%) 11.7 10.2  
EBIT  3.7 3.0 0.7
EBIT margin (%) 3.2 2.7                   
EBIT before special effects 5.8 3.0 2.8
EBIT margin before special effects (%) 5.0 2.7  
Earnings after taxes 1.5 0.1 1.4

29.02.2016 | Schweizer Electronic AG fulfils expectations for turnover and earnings and takes a confident view of perspectives for 2016

Preliminary figures for the business year 2015

  • Order book jumped by 25% to record level
  • Turnover increases to 115.5 million euro

Schramberg, February 29, 2016 – According to preliminary figures Schweizer Electronic AG has closed the accounts for the fiscal year 2015 with a record turnover of 115.5 million euro.

The order book climbed to a record level of 149.1 million euro by the end of the year 2015 (previous year 119.2 million euro), presenting a promising starting position for further growth. A particularly strong fourth quarter substantially contributed to the positive development of order income, which jumped by 25% to 145.4 million euro. Order activities of the automotive customers were very satisfying with an increase of 20.8 million euro to 105.5 million euro. Moreover, SCHWEIZER aims at a narrowly-focused enlargement of its customer portfolio and has already received significant new orders from customers of the aviation industry.

The company exactly met its expectations with earnings before interest and tax (EBIT) of 8.5 million euro (previous year €10.0m), which corresponds to an EBIT margin of 7.4 percent (previous year 9.1%). The EBIT was affected by two exceptional expenses: Firstly, the development of the euro currency in relation to the US dollar had negative effects on SCHWEIZER’s earnings, as significant volumes are purchased in the US and in Asia and secondly, the EBIT was burdened by one-time personnel expenses. Excluding these non-recurring items making up a total of 2.1 million euro in 2015, the EBIT would amount to 10.6 million euro (previous year €10.0m), which corresponds to an EBIT margin of 9.2 percent (previous year 9.1%).

 

Outlook

“Thanks to our leading position in the growth markets of fuel efficiency and CO2 reduction as well as ADAS (advanced driver assistance systems) we expect to continue to grow faster than our reference markets also in the years to come.

Depending on the business development with our Asian partners e.g. in the field of high frequency technology and under consideration of the rather cautious forecasts for the overall economy as well as for the global PCB market, we expect a turnover increase of 3 to 5 percent in 2016”, comments Dr. Maren Schweizer, CEO of Schweizer Electronic AG.

Based on the planned customer and product portfolio, the company expects stable operative business results, which should correspond to the slightly positive turnover forecast for 2016. The dynamic business environments on the energy-, industrial metal- and currency markets, however, will involve risks as well as opportunities. Furthermore, the increasing share of products from Asian partners will increase turnover in absolute figures, but due to the nature of trading operations, the margins will be lower than those generated by the sale of own products. The exclusion of one-time personnel expenses will have positive effects on the EBIT margin.

Due to growing activities in its subsidiaries, SCHWEIZER decided to publish an additional consolidated financial statement based on the IFRS rules for 2015. Final figures for the fiscal year 2015 will probably be published on March 30, 2016.

 

Key figures of Schweizer Electronic AG (HGB)

in million euro

2015

2014

Change

Order income

145.4

116.3

+25.0%

Order book

149.1

119.2

+25.1%

Revenues

115.5

110.2

+4.8%

EBITDA

12.3

14.2

-13.3%

EBITDA margin (%)

10.7

12.9

 

EBITDA before special effects

14.4

14.2

+1.4%

EBITDA margin before special effects (%)

12.5

12.9

 

EBIT

8.5

10.0

-14.9%

EBIT margin (%)

7.4

9.1

 

EBIT before special effects

10.6

10.0

+6.0%

EBIT margin before special effects (%)

9.2

9.1

 

Earnings after taxes

5.5

5.6

- 2.6%

2015

30.10.2015 | Schweizer Electronic continues to grow profitably in the third quarter

  • EBIT increases disproportionally by 13.8 %
  • Order intake boosts by 30% 

Schramberg, October 30, 2015 – With cumulated revenues of EUR 88.4 Mio (previous year EUR 83.3 Mio.) and quarterly sales of EUR 28.5 Mio (previous year EUR 28.0 Mio) Schweizer Electronic AG again exceeded previous year’s figures. Operating quarterly results before interest and tax (EBIT) rose faster than turnover by 13.8% to EUR 3.3 Mio (previous year EUR 2.9 Mio). Thus the EBIT margin climbed to 11.6% against 10.4% in the previous year. As before, also the third quarter was affected by negative exchange rate fluctuations amounting to EUR 0.3 Mio in total. Adjusted by this special effect the EBIT would amount to EUR 3.6 Mio corresponding to an EBIT margin of 12.6%. The equity ratio remained stable compared to last year with 59.7% against 59.6% at the end of 2014.

Boosting by 30% to EUR 39.3 Mio against EUR 30.2 Mio the year before, incoming orders were at a particularly high level with customers from the automotive section placing 76% of the new orders, which reflects their usual turnover share. Revenues generated by innovative technology products again grew disproportionally by 14.3% to EUR 14.8 Mio, now making up 52% of SCHWEIZER’s turnover (previous year 46%). Sales with America, notably the US, showed a strong development as well and rose by 81.3% to EUR 2.9 Mio.

“Despite the increasingly challenging market environment we continued our profitable growth and exceeded the targets we had set ourselves,” says Dr. Maren Schweizer, CEO of Schweizer Electronic AG. “Our order book increased again, and the very good level of incoming orders underlines the rising demand for SCHWEIZER’s products. We expect a turnover of EUR 115 Mio for the year 2015, this is a 5% growth against last year. Considering the unscheduled special effects of EUR 1.7 Mio in the first half of 2015 and the anticipated negative currency effects of EUR 0.4 Mio for the second half of 2015, we adjust our profit forecast to EUR 8.0 – 9.0 Mio for the fiscal year 2015. This forecast lies at the upper end of our previous expectations and corresponds to an EBIT margin of 7-8%.”

08.10.2015 | Kristina Schweizer left Supervisory Board of Schweizer Electronic AG

Schramberg, 28.09.2015 – With effect from September 15, 2015 Ms Kristina Schweizer left the Supervisory Board of Schweizer Electronic AG for personal reasons.

07.08.2015 | Schweizer Electronic boosts sales by 8.3% in the first Half-Year 2015

EBIT before special effects increases by 14.9%

  • Withdrawal from business field energy
  • Innovative technology products continue to rise 

Schramberg, August 07, 2015 – Schweizer Electronic AG closed the accounts of the first Half-Year 2015 with a turnover growth of 8.3% to 59.9 million Euro (2014: 55.3 million Euro). Sales with innovative technology products grew disproportionally by 24.8% to 30.2 million Euro, thus forming the basis of this success. The EBIT before special effects amounts to 5.4 million Euro, corresponding to a margin of 9.0% (previous year 8.5%). One-time personnel expenses and exceptional charges related to currency fluctuations in the division Electronic however, reduced the EBIT (earnings before interest and tax) to 3.7 million Euro,  which corresponds to an EBIT margin of 6.2%. (EBIT 2014: 4.7 million Euro).

The company’s financing structure again remains on a high and solid level. At the end of the first half-year 2015 the equity ratio was 59.8% compared to 55.8% at the end of previous year’s period.

Due to the continuously critical overall situation on the photovoltaics market, Schweizer Electronic AG decided to withdraw from its business field energy. This business field had been established for manufacturing photovoltaic cells and modules. The PCB (printed circuit board) business with power inverters for the solar industry remains untouched by this decision.

SCHWEIZER’s turnover growth is due to an increase of output from the Schramberg production plant as well as from its Asian partner network. The turnover achieved through the plant in Schramberg rose by 6.1% to another high of 53.7 million Euro, while sales related to the Asian partner network jumped by 31.9% to 6.2 million Euro. Germany still is SCHWEIZER’s biggest market with a turnover share of 61.4%. Other regions, however, also developed favourably - in particular America, where business doubled to 5.7 million Euro, accounting for almost 10% of total sales now.

“We are very happy with the business development during the first six months of this fiscal year,” says Dr. Maren Schweizer, CEO of Schweizer Electronic AG. “Besides the stable automotive business, order income rose in particular in the industry and communication sectors. Our additional production capacities in Asia are undergoing the last phase of their customer qualification process, meaning we will be able to access further capacities for

series productions from 2016 onwards. Having withdrawn from the business field energy, we will now dedicate ourselves with even more emphasis to the expansion of our business field Electronic and the building up of the business field Systems together with Infineon.“

With a view to the future business development she adds: “Considering the starting date for series production in Asia, we are able to adjust our sales forecast for 2015 from 3-7% so far to 5-7% now, which comes up to a sales expectation of 115-118 million Euro for the fiscal year 2015. We expect our operative EBIT margin before special effects to continue its favourable development up to 8-9%, amounting to an EBIT before special effects between 9.2 and 10.6 million Euro.” 

Today, SCHWEIZER publishes its half-year financial as per June 30, 2015, which is available on http://www.schweizer.ag/en/investor-relations/financial-reports.html.

29.04.2015 | Schweizer Electronic AG increased Q1 revenues by 11 percent to a record amount of more than 30 million euro

Schramberg, 29. April 2015 – Schweizer Electronic AG today announced the financial    figures for the first quarter 2015. With a turnover increase of 11 percent to 30.9 million euro for the first time in Q1, the company visibly distinguished itself from a rather slower development trend on the market. The turnover which was achieved through the Asian partner network also showed a positive trend with a total amount of 3.1 million euro, thus increasing by 34 percent against the previous year’s period (2014: 2.3 million euro).

The sales increase was in particular based on SCHWEIZER’s business successes with technologically sophisticated products, which were strongly demanded by automotive customers. Sales with this customer segment increased by 18 percent to 23.6 million euro compared to 20.0 million euro the year before. Products from the company’s innovation portfolio power electronics, embedding and system cost reduction contributed with 50 percent to total sales figures against 45 percent in 2014. This shows that SCHWEIZER continues its trend to steadily increase the turnover share of innovative high technology products.

The result before interest and tax (EBIT) amounted to 2.5 million euro (previous year 2.9 million euro), which is a decline of 0.4 million euro against last year. The EBIT was burdened by a very strong dollar with regard to the euro, with the dollar rising by 18 percent compared to the previous year’s quarter. Thus mentioned, it has to be considered that SCHWEIZER’s network of business partners is characterised by an international supplier base, while the client base is mainly from Europe.

Order income amounted to 28.5 million euro and the order backlog was 116.5 million euro at the end of the first quarter, both declining against last year’s period. This fluctuation cannot be regarded as a trend reversal of the order position. Analogous to the turnover distribution in 2014, automotive customers represented a share of 72 percent in incoming orders in the first quarter 2015.

SCHWEIZER’s equity rose to a new record of 50.1 million euro at the end of the first quarter, which is equivalent to an equity ratio of 58.9 percent. The net debt position reduced by 1.6 million in 2014 euro to 1.1 million euro this year, which is equivalent to a net gearing ratio of 2 percent.

Dr. Maren Schweizer, CEO of Schweizer Electronic AG, comments: “In the first quarter of this business year, SCHWEIZER was able to expand its leading market position and gain further market shares in the areas of mobility and efficiency, the long-term drivers of growth, and we achieved a very positive turnover increase. The development of the US dollar currency and as a consequence the production cost will remain challenging. We will therefore place a focus on measures to increase efficiency in the forthcoming quarters. Development resources for our divisions Electronic and Systems, however, will not be influenced by this, and we will continue optimising our product portfolio.” SCHWEIZER confirms its forecast for 2015. Dr. Schweizer adds: “Also in 2015, we expect to grow faster than the reference markets and to further increase our market share. From today’s perspective, a turnover increase of three to seven percent against the record sales of 2014 seems to be realistic.”

31.03.2015 | Final figures confirm successful business trend – Dividend increases to 0.65 Euro per share

Schramberg, March 31, 2015 – Schweizer Electronic AG today released final figures for the last fiscal year. The company closed the accounts in 2014 with record sales of 110.2 million Euro (2013: 101.2 Mio Euro) and earnings before interest and tax (EBIT) of 10.0 million Euro (2013: 9.8 million Euro). This is the company’s second highest EBIT ever, and it corresponds to an EBIT margin of 9.1% (2013: 9.7%). Additional expenditure for continuing the expansion of the Asian production capacities - with focus on Vietnam - burdened the EBIT with 1.1 million Euro.

The performance at SCHWEIZER’s high technology plant in Schramberg, Germany was particularly satisfying, reporting sales of 100.3 million Euro and thus passing the historical mark of 100 million Euro (2013: 94.6 million Euro). With 50.5 million Euro, highly innovative technology products already represented 46% of the company’s total turnover, and they are expected to continue driving growth especially in Schramberg. The turnover of the Asian partner network also showed a pleasing development, boosting by 54% to 9.9 million Euro against 6.4 million Euro in 2013. Thanks to the continuously high demand SCHWEIZER’s order backlog increased again in 2014, amounting to 119.2 million Euro against 114.2 million Euro the year before. Equity capital increased to 48.4 million Euro (2013: 45.1 million Euro), which corresponds to an equity ratio of 59.6% against 58.8% the year before.

“We are very pleased with last year’s business results and – as promised – we would like to let our shareholders participate in this success. Therefore, we will suggest an increase of our dividend to 0.65 euro on occasion of our Annual General Meeting 2015”, says Dr. Maren Schweizer, CEO of Schweizer Electronic AG. And she concludes, “Our capacities are well utilised and thanks to our international production landscape, we are ideally equipped for further growth. That’s why we stick to our forecast to grow faster than our reference markets in 2015 as well.”

The annual report for the year 2014 is available on http://www.schweizer.ag/de/investorrelations/finanzberichte.html. An English version of this report will be available soon.

03.02.2015 | SCHWEIZER boosts turnover and earnings in 2014

  • SCHWEIZER boosts turnover to 110.2 million Euro
  • EBIT rises to 10 million Euro
  • SCHWEIZER further improves equity ratio

Schramberg, February 3rd, 2015 – According to preliminary figures, Schweizer Electronic AG closed the accounts in the fiscal year 2014 with its highest turnover ever. Sales in 2014 increased by 8.9% to 110.2 million Euro against 101.2 million Euro the year before. Earnings before interest and tax (EBIT) rose by 2% to 10 million Euro (previous year 9.8 million Euro), representing the second-highest EBIT in the company’s history, while additional expenditure for continuing the expansion of the Asian production capacities - with focus on  Vietnam - burdened the EBIT with 1.1 million Euro.

With sales of 100.3 million Euro, the production performance in Schramberg, Germany, broke through the historical mark of 100 million Euro. (previous year 94.6 million Euro). Sales effected through the Asian partner network also showed a satisfactory development, boosting by 54% to 9.9 million Euro against 6.4 million Euro in 2013. Highly innovative technology products strongly contributed to SCHWEIZER’s record sales with 50.5 million Euro, representing already 46% of the total turnover. This trend is expected to continue in future particularly in Schramberg.

Despite its growth, SCHWEIZER was able to increase equity capital by 3.3 million Euro to 48.4 million Euro. This corresponds to an equity ratio of 59.5% against 58.8% the year before. Final figures will be released on March 31, 2015.

Dr. Maren Schweizer, CEO of Schweizer Electronic AG comments: “We proceeded very well in 2014 on operational as well as strategic level. We increased turnover and earnings, and our order book is well stocked. Thanks to the continuously high demand our order backlog increased again in 2014, amounting to 119.2 million Euro against 114.2 million Euro the year before. With our partner and investor WUS, we have access to additional production capacities to serve the rapidly growing market for high frequency printed circuit boards (HF PCBs). Moreover, we plan to jointly tap the chip embedding market with our partner Infineon in the coming years, as this is the future market for power electronics applications. Thus, these two new partnerships further improved our already good position in 2014.”

2014

26.11.2014 | Infineon Acquires a 9.4 Percent Stake in PCB Manufacturer Schweizer Electronic

Munich and Schramberg, Germany – November 26, 2014 – The semiconductor manufacturer Infineon Technologies AG (FSE: IFX / OTCQX: IFNNY) and the printed circuit board (PCB) manufacturer Schweizer Electronic AG (FSE: SCE) announced today that Infineon will acquire a 9.4 percent stake in Schweizer. The relevant contracts were concluded today. Both companies agreed on strict confidentiality on the terms.

By investing into Schweizer Infineon emphasizes its intention to jointly develop technologies for the integration of power semiconductors into PCBs and to tap the chip embedding market for high-power automotive and industrial applications. Schweizer’s chip embedding technology will round out Infineon’s proprietary chip embedding packaging technology BLADE, used for example for direct current supply (DC/DC conversion) that is necessary for processors in computer and telecommunications systems.

Chip embedding yields advantages
While PCBs have chips connected to their front and backside today, chip embedding will permit in the future that the semiconductors can be “embedded” in the inside of the PCB. The PCB will become smaller. This will benefit systems in vehicles, for which there is only little space available such as the electric power steering system, active suspension or electrical pumps. Moreover, the cooling of the chips will be improved. The heat created by the chips is dissipated directly via the PCB. This is particularly beneficial in applications that require high power and whose power semiconductors needed elaborate cooling until now. These are for example the compressors in a vehicle air-conditioning system, where electrical power may reach up to 2 kilowatts (kW). In addition, the automotive industry expects the 48-volt network to gain importance besides the already present 12-volt onboard network.

Since higher electrical power can be used this way, it will be easier to expand hybrid functionality (“eTurbo” with 5kW up to 20kW) to vehicles of lower and medium price segments as well. This is where chip embedding can help.

Dr. Reinhard Ploss, CEO of Infineon Technologies AG, says: “We improve the performance and energy efficiency of vehicles and industrial applications with system competence and the use of highly innovative technologies. Our shareholding in Schweizer Electronic AG supports us on the road from product thinking to system understanding. Chip embedding yields a great added value for our customers, as their systems become more compact and even more efficient at the same time.”

Dr. Marc Schweizer, CEO of Schweizer Electronic AG, explains: “System boundaries between PCBs and semiconductors are going to change, and this requires new business models. We are expecting a high growth potential here in a few years. Infineon is the technology leader for power semiconductors and Schweizer is a leading manufacturer of high-performance printed circuit boards in the automotive and industrial segments. Owing to their excellent market positions and good customer relations, our two companies are a very good fit. We have already proven this to be the case by our jointly developed demonstrators for tailor-made customer solutions.”

And in view of the long company tradition, Dr. Schweizer adds: “In the course of its 165-year company history, Schweizer has proven time and again that it generates sustainable business development through its flexibility and capacity to quickly adjust to market trends. The agreement with Infineon is one next step to contribute to shaping the future in the electronics industry.”

Infineon is technologically leading in power semiconductors and Schweizer is leading in high-performance PCBs. As suppliers of the automotive industry, each of the companies is the number two in the global ranking of their product markets.

For several years  already, Infineon and Schweizer have collaborated in automotive electronics. In October 2013, for example, they presented a jointly developed battery switch, which enables the car battery to be safely disconnected in case of an accident or other critical situations.

About Schweizer
Schweizer Electronic AG is a global best-in-class technology company, manufacturing premium PCBs, innovative solutions and services for automotive, solar, industry and aviation electronics. Based on recognized technology and consultancy competencies, Schweizer’s products and systems address key challenges in the areas of Power Electronics, Embedding and System Cost Reduction and are characterized by energy and environmentally friendly features. Together with its partners Elekonta Marek GmbH & Co. KG, Meiko Electronics Co. Ltd. and WUS Printed Circuit., Ltd. the company offers through its electronics division cost and production optimised solutions for small, medium and large series and within this network employs more than 20,000 people in Germany, Japan, China and Vietnam.
 
With about 700 employees Schweizer achieved sales of 101.2 million Euro in Fiscal Year 2013 (ending December). The company was founded in 1849, is managed by family members and listed at the Stuttgart and Frankfurt Stock Exchanges (ticker symbol „SCE“, „ISIN DE 000515623“). Further information is available at www.schweizer.ag
 

About Infineon
Infineon Technologies AG, Neubiberg, Germany, offers semiconductor and system solutions addressing three central challenges to modern society: energy efficiency, mobility, and security. In the 2013 fiscal year (ending September 30), the company reported sales of Euro 3.84 billion with close to 26,700 employees worldwide. Infineon is listed on the Frankfurt Stock Exchange (ticker symbol: IFX) and in the USA on the over-the-counter market OTCQX International Premier (ticker symbol: IFNNY). Further information is available at www.infineon.com

This news release is available online at www.infineon.com/press and at www.schweizer.ag/press

Media contacts:

Schweizer Electronic AG
Christina Blake, Media & Communications
Einsteinstraße 10
78713 Schramberg
Phone: +49 7422 / 512-213
Fax:   +49 7422 / 512-777-213
Email: communications@schweizer.ag

Infineon Technologies AG
Monika Sonntag, Media Relations
Am Campeon 1-12
D-85579 Neubiberg
Phone: +49 89 234-24497
Email: monika.sonntag@infineon.com

07.11.2014 | SCHWEIZER’s sales, revenues and cashflow exceed previous year’s figures at the end of the third quarter 2014

Schramberg, November 7, 2014 – With a cumulated turnover of 83.3 Mio Euro (previous year 75.6 Mio Euro) and an order backlog of 121.2 Mio Euro (previous year 107.9 Mio Euro) at the end of the third quarter 2014, SCHWEIZER again surpassed its previous year’s figures. Quarterly sales rose to 28.0 Mio Euro from 26.7 Mio Euro the year before. The company managed to expand its positioning in the automotive industry with an increase of 16 % to 20.6 Mio Euro. Cumulative EBIT by the end of the third quarter increased to 7.6 Mio Euro from 7.1 Mio Euro in last year’s period. This corresponds to an EBIT margin of 9.1%. Quarterly EBIT at the end of September was within the company’s expectations with 2.9 Mio Euro against 3.3 Mio Euro the year before and an EBIT margin of 10.4%. Cash flow from operating activities climbed to 7.3 Mio. Euro in the first three quarters of this fiscal year compared to 6.3 Mio Euro in previous year’s period.

Particularly positive is the increase of order income in the Asian production capacities. They boosted by 98% to 11.1 Mio Euro at the end of September. Total sales realised through SCHWEIZER’s Asian partner network jumped by 51% against last year to 7.4 Mio Euro by the end of September.

Dr. M. Schweizer, CEO Schweizer Electronic AG, comments, “Our business results after the first nine months of this fiscal year are really satisfying and come up to our expectations. In the third quarter, successes in our portfolio management already had an important influence on the improved results compared to the second quarter. SCHWEIZER’s clear technological positioning in the area of innovation and growth technologies for power electronics, embedding and system cost reduction made a significant contribution to the business performance. Looking forward to the year end results, we are happy to specify our forecast with expected sales of 108 Mio Euro for 2014 and an EBIT around 9 to 10 Mio. Euro, already considering our extraordinary expenses for the production start in Vietnam.”

14.08.2014 | SCHWEIZER reports successful first Half-Year 2014: Revenues and Net Profit increased by 13%, EBIT boosted by 24%

Schramberg, August 14, 2014 – SCHWEIZER’s financial results for the first half-year 2014 came up to its expectations: Revenues boosted by 13% to 55.3 million Euro (previous year 48.9 million Euro), and net profit as well increased by 13% amounting to 2.7 million Euro (previous year 2.4 Mio Euro). This is equivalent to earnings per share of 0.72 Euro against 0.63 Euro the year before. Earnings before interest and tax (EBIT) also showed a very positive development rising 24% to 4.7 million Euro (previous year 3.8 million Euro). The EBIT margin amounts to 8.5% against 7.8% the year before.

SCHWEIZER’s level of incoming orders is promising as well: In the first half-year 2014 the company received orders amounting to 61.0 million Euro (plus 4.1% against the previous year), 72% of which being placed by customers of the automotive industry and 24% by the industry electronics sector. Revenues boosted even more than incoming orders, with sales to the most important customer groups automotive and industry climbing over-proportionally by 15% each. Looking at the product portfolio, sales of high technology products contributed with 24.0 million Euro to first half-year revenues compared to 18.0 million Euro the year before. 

“After the very positive operative results in the first half-year 2014 we are able to adjust  our expectations for the current fiscal year. We now expect revenues to climb by 7% in the fiscal year 2014, which is the upper end of our previous forecast. Net profit is expected to develop accordingly. Further optimisation of our portfolio management in the second half-year 2014 could generate positive effects on our earnings. SCHWEIZER’s order backlog had a value of 119.5 million Euro at the end of June 2014, thus being 20% up against last year’s period. This already is a good indication that our production capacity will be utilised up into the year 2015”, stated Dr. Marc Schweizer, CEO of Schweizer Electronic AG.

The company’s financing structure remains on a high and solid level as well. Thanks to the net profit achieved in the first half-year, SCHWEIZER’s equity increased to 47.8 million
Euro (43.3 million Euro the year before). Thus, the equity ratio was 55.8% at the end of the first half-year 2014.

Today, SCHWEIZER publishes its half-year financial as per June 30, 2014, which is avail-able on http://www.schweizer.ag/en/investor-relations/financial-reports.html.

 

18.07.2014 | Strategic Partner WUS invests into SCHWEIZER by acquiring a stake of 4.5 %

Schramberg, July 18, 2014 – Following the exclusive, long-term strategic alliance for the High Frequency (HF) segment, WUS Printed Circuits Co., Ltd., Kunshan/China and Schweizer Electronic AG, Schramberg/Germany, agreed on a capital transaction with WUS acquiring 4.5 % of SCHWEIZER’s shares. By acquiring this equity stake, WUS underpins its strong strategic interest in SCHWEIZER’s business. This step strengthens SCHWEIZER’s partner network even further and expands the company’s access to a pro-found internal high technology innovation pipeline.

The equity stake of 4.5 % sold to WUS was taken from the share pool of the SCHWEIZER family and SCHWEIZER treasury shares.

“Only less than 3 months ago, SCHWEIZER and WUS agreed on their exclusive, long-term strategic partnership which allows us and our customers access to further HF production capacities in Asia. We are very pleased about this soon capital transaction since it enhances WUS’ strong interest in exploiting the business opportunities for HF PCBs on the global automotive market together with SCHWEIZER”.

“The HF market is going to increase fivefold over the next five years, and will have increased ten times by 2024. SCHWEIZER’s HF sales boosted by almost 200 % in 2013, and we expect further continuous growth. While our long-term strategy is to steadily increase our market share, we think that together with WUS we will be able to offer our customers supply capacities of 50 Mio EUR in the first phase. This will trigger an attractive upward potential for us”, says Dr. Marc Schweizer, CEO of Schweizer Electronic AG. And he goes on:

“Considering our international production set up, SCHWEIZER is extremely well positioned with the technology plant on our premises in Germany, the expertise and production footprint in Asia of our partner Meiko Electronics in Japan and the supplementary profound platform and resources of WUS in China, serving the HF segment”.

And Chris Wu, Managing Director of WUS Printed Circuits Co., Ltd. adds:” We realised very soon that our exclusive partnership bears a win-win solution for both companies as well as for our customers in order to face our common challenges. Therefore we decided to buy the equity stake of 4.5 %, allowing us to further participate in SCHWEIZER’s business results and to share risks as well as positive outcomes with our partner”.

30.04.2014 | SCHWEIZER raised revenues by 18% and doubled first quarter results

Order backlog and recent step towards internationalisation boost growth potential

Schramberg, April 30, 2014 - Schweizer Electronic AG today announced their financial figures for the first quarter 2014. Within this period the company achieved sales revenues of 27.8 million Euro (previous year 23.6 million Euro), which is a turnover increase of 18% against last year’s period. The result before interest and tax (EBIT) amounted to 2.9 million Euro (previous year 1.3 million Euro). EBIT margin was at 10% (previous year 6%).

With an order entry of 35.0 million Euro in the reporting year (previous year 27.4 million Euro), SCHWEIZER registered an increase of 28% compared to the previous year. Incoming orders in the first quarter of 2014 were by 30% higher than revenues, giving reason for a positive short-term outlook as regards the company’s sales development. The order backlog amounted to 121.4 million Euro at the end of March (previous year 93.4 million Euro).

Financial and liquidity figures as well improved to a major extent. The equity ratio increased to 46.9 million Euro, which is equivalent to an equity ratio of 58% (Dec. 31, 2013: 58.8%). The net debt position remained stable with 2.7 million Euro, which is equivalent to a net gearing ratio of 6%.

„With our order backlog having increased again since the end of last year to currently 121.4 million Euro, our capacities are already well-utilized. By expanding our partner network with reliable and experienced international market players, we are opening the door to benefit from extended production capacities and are thus well-established to meet the requirements of already existing as well as future customers. Thanks to our additional partnership with WUS, our customers will have access to further High Frequency production capacities in Asia, while we continue our joint venture with MEIKO and ramp up our production capacities in Vietnam. In parallel SCHWEIZER invests in its technology headquarter in German in order to focus its production on further innovations”, says Dr. Marc Schweizer, CEO of Schweizer Electronic AG.

For the fiscal year 2014 the company expects revenues to boost by 3 to 7% in comparison with last year. Following these expectations for sales growth as well as changes to the product portfolio, Schweizer Electronic AG anticipates a slight increase of its net profit in 2014. Further growth is expected for 2015, provided that the global economic development will remain stable. These forecasted developments do not take account any contributions towards sales and net profit, which are envisaged as a result from the partnership for HF PCBs with the company WUS.

28.04.2014 | WUS and SCHWEIZER agree on partnership for the HF segment

Schramberg, April 28, 2014 – WUS Printed Circuits Co., Ltd., Kunshan/China and Schweizer Electronic AG, Schramberg/Germany, concluded an exclusive long-term agreement on the cooperation for the production of High Frequency Printed Circuit Boards  (HF PCBs) for the global automotive and industrial market.

Due to the increasing global demand for specific base materials and hybrid
assemblies, the market for HF PCBs is growing at a fast pace, urging industry players to join forces in order to provide their customer with the desired quantities. HF PCBs are required for applications such as adaptive cruise control and lane change assistance, thus enabling autonomous driving in the future.

Thanks to their longstanding engagement in the telecommunications segment, WUS
has a profound technological platform and the appropriate resources to enter this partnership. Furthermore, the company has a proven track record of more than 40 years’ in the PCB market.

With a global market share of around 30% SCHWEIZER is one of the market leaders in the segment of automotive HF PCBs. By partnering up with WUS, SCHWEIZER is able to refer to extended production capacities in order to expand its market position.

Customers will benefit from their established and successful interfaces with SCHWEIZER and a targeted and quick technology transfer from Schramberg to Kunshan securing a second source in case of supply shortages. Furthermore, a continuous know-how transfer from Germany to China will ensure extended delivery capacities for next generation products as well.

“Maintaining a sound and healthy growth of SCHWEIZER, which is based on a long and successful business history of 165 years with long-term partnerships, is one of our obligations towards all our stakeholders. Timing remains critical for success. Thanks to our additional partnership with WUS, our customers will have access to further HF production capacities in Asia, while we continue  our joint venture Meiko Schweizer Electronics and ramp up our production capacities in Vietnam. With the expertise and process know-how of our partner MEIKO and the supplementary profound platform and resources of WUS, we have a sound and reliable production setup in Asia and are well prepared to meet the requirements of our customers. I am convinced that this will strengthen our value proposition and that it will be to the benefit of our customer as well as the three companies.” says Dr. Marc Schweizer, CEO Schweizer Electronic AG.

And Chris WUS, Managing Director of WUS Printed Circuits Co., Ltd., adds:” This is a win-win solution for both companies as well as for our customers in order to face our common challenges. We are very happy to enter this partnership with SCHWEIZER and to contribute with our technical platform and our resources to expanding the international business activities of SCHWEIZER’s partner network.”

 

For further information please contact:

Christina Blake
Media & Communications              
Schweizer Electronic AG
Einsteinstraße 10
78713 Schramberg / Germany
Phone: +49 7422 512 – 213
Fax: +49 7422 512 – 777 213
E-Mail: communications@schweizer.ag
Please visit our website: www.morethanPCBs.com


WUS Printed Ciruit (Kunshan) Co. LTD
55 Heilongjiang N Rd
Kunshan, Jiangsu, China
Phone: +86 512 5735 6148
Fax: +86 512 5735 6030
E-Mail: fin30@wuspc.com
Website: http://www.wuscn.com

31.03.2014 | SCHWEIZER increases dividend to 0.60 Euro per share

Schramberg, March 31, 2014 – Schweizer Electronic AG today released final figures for the fiscal year 2013, showing earnings before interest and tax (EBIT) of 9.8 million Euro (previous year 5.2 million Euro). This corresponds to an EBIT margin of 9.7% (previous year 5.2%) and an increase of 88% against last year. With an annual result of 6.1 million Euro, previous year’s net profit was surpassed by 782%, which corresponds to earnings per share of 1.62 Euro.

Revenues in 2013 increased to 101.2 million Euro compared to 100.2 million Euro in 2012.

Climbing from 71.3 million Euro (previous year) to 126.6 million Euro, incoming orders showed a significant positive development last year, which is mainly due to customer inquiries from the automotive sector. Thanks to the extremely high innovative power of this customer segment, the order volume last year more than doubled compared to 2012. Order intake from industry electronics also developed favourably, ensuring that SCHWEIZER could start the new fiscal year with an order backlog of 114.2 million Euro (previous year 89.8 million Euro).

In the previous fiscal year, Schweizer Electronic AG was able to increase equity capital by 4.1 million Euro to 45.1 million Euro. This corresponds to an equity ratio of 58.8% at the end of the fiscal year.

Due to the very positive business progress and the company’s solid economic situation, SCHWEIZER’s Executive Board and the Supervisory Board will be suggesting a dividend of 0.60 Euro (previous year 0.55 Euro) on occasion of the Annual General Meeting on July 4, 2014. This represents an increase of more than 9% and is the third dividend increase in succession.

Based on positive forecasts for the global economic development as well as for SCHWEIZER’s market segments, the company this year expects revenues to boost by 3 to 7% in comparison with last fiscal year. Following these expectations for sales growth as well as changes to the product portfolio Schweizer Electronic AG anticipates a slight increase of its net profit in 2014.

The annual report for the year 2013 is available on http://www.schweizer.ag/de/investorrelations/finanzberichte.html. An English version of this report will be available soon.

2013

09.12.2013 | Elekonta and SCHWEIZER agree on partnership

Schramberg/Gerlingen, December 9, 2013 – Elekonta Marek GmbH & Co. KG and Schweizer Electronic AG have concluded an agreement on a cooperation in the prototype segment for innovative Printed Circuit Board (PCB) solutions.

The increasing trend towards high tech and innovative products in the European PCB market forms the basis of this collaboration. It is a constant challenge for suppliers to provide customers with adequate technology samples in high quality which are suitable for subsequent serial production.

Via the cooperation with SCHWEIZER, Elekonta, a company focussing on prototype manu-facturing of PCBs, expands its service for existing customers. Following the successful ex-ecution of prototypes, these customers will then have the option of having SCHWEIZER produce mid-size and high-volume series. SCHWEIZER’s customers, on the other hand, will be offered a second source for the production of samples via Elekonta.

In their collaboration and for the benefit of their customers, the partners will concentrate on the area of new technologies, the related exchange of trends and the multiplying factor connected to it. Initially, Elekonta and SCHWEIZER will focus on HDI, thick copper, HF and impedance-controlled PCBs.

„The new partnership will ensure that technology samples can later on be produced in ad-equate quality and reliability in high volumes” says Christian Rössle, Vice President Sales & Marketing at SCHWEIZER.

And Lars Presche, Managing Director with Elekonta Marek, adds: “Via this cooperation we would like to generate for our customers an additional value-add in the product life cycle and to counter the continuously growing trade business”.

08.11.2013 | SCHWEIZER successfully completes third quarter and increases forecast for Fiscal Year 2013

Schramberg, November 8, 2013 – Schweizer Electronic AG today announces their financial figures for the third quarter 2013, ending September 30. Highest values each for order entry, sales and EBIT margin confirm the positive development of the current fiscal year. Continuous improvements resulted in the fact that SCHWEIZER increases its sales expectations for the PCB business from more than EUR 90 million to approx. EUR 100 million and expects an EBIT margin of 7.0 – 7.5 % (up to now more than 5 %).

From July to September, the company achieved sales of EUR 26.7 million (previous year EUR 23.8 million). Thus, sales increased by approx. 12 % compared to the same period in 2012 and therefore exceeds the company’s expectations. Earnings before interest and taxes (EBIT) amounted to EUR 3.3 million (previous year EUR 1.2 million). This corresponds to an EBIT margin of 12 % (previous year 5 %).

With an order entry of EUR 35.2 million (previous year EUR 20.4 million), the company registered an increase of 73 % compared to the third quarter of the previous year. The positive development was driven particularly by customers from the automotive and industry segment.

“In the current fiscal year we still expect a declining European PCB market in the range of around 10 %. We were able to clearly resist this trend”, says Dr. Marc Schweizer, CEO of Schweizer Electronic AG. “There are primarily three reasons which allow the company to positively look at the coming years. Firstly: the right products, based on innovations addressing today’s megatrends mobility and energy efficiency; secondly the right strategy, which will generate added value for our customers and thirdly our presence in the right, namely the growing regions, like Asia.”

24.10.2013 | Reappointment of Board Members Dr. Marc Schweizer und Nicolas Schweizer

Schramberg, October 24, 2013 – On Wednesday this week and ahead of schedule, the Supervisory Board of Schweizer Electronic AG has reappointed Board Members Dr. Marc Schweizer and Nicolas Schweizer until 2018. Their contracts were previously ending July 2015 resp. March 2016. Dr. Marc Schweizer has been a member of the Executive Board since April 1, 2005 and was appointed CEO in 2007. Nicolas Schweizer is a member of the Executive Board since April 1, 2011.

Based on the growing internationalisation of Schweizer Electronic AG, the company announced at the same time organizational changes on Board level, effective November 1, 2013. As of this point in time, Nicolas Schweizer, Chief Commercial Officer, and Bernd Schweizer, Chief Operating Officer, will be jointly responsible for the Division Electronic based in Schramberg, site of the company’s headquarters.

The scope of responsibilities of Marc Bunz, Chief Financial Officer, will remain unchanged. In his current function, he is also accountable for the orchestrating of the Asian and European activities.

In his function as CEO, Dr. Marc Schweizer will continue to concentrate on strategic topics and in parallel advance the internationalization of the company, particularly the collaboration with the cooperation partner Meiko Electronics. For this reason he will relocate his regular place of work to Asia in November.

Thus, the Board of Directors will continue to jointly assume responsibility for the commercial interests of the Schweizer Group, its international sites and the various divisions.

16.10.2013 | Infineon and SCHWEIZER present a Demonstrator of a high-performance Battery Switch during Congress „Electronics in the Vehicle"

Baden-Baden, October 16, 2013 – On the occasion of the VDI congress „Electronics in the Vehicle“ („Elektronik im Fahrzeug“), taking place October 16 to 17 in Baden-Baden, Infineon Technologies AG and Schweizer Electronic AG for the first time present a jointly developed demonstrator of a high-performance battery switch. This battery switch demon-strates how, on smallest installation space, entire battery circuits or subnets can be switched electronically, at impressive benchmark data of 400 A static current and 7,200 A peak current.

On the one hand, this is enabled by the latest MOSFET generation of Infineon Technologies AG with the new innovative TO-leadless package in combination with the 40 V OptiMOS™ semiconductor technology, and on the other hand, via PCB Inlay technology of Schweizer Electronic AG, with copper inlays of 2 mm thickness for maximum ampacity and heat dissipation.

Typical applications for the battery switch are the replacement of today’s pyroelectric solutions; the switching of high current loads or partial battery nets in vehicle operation as well as in parking mode; the prevention of electromigration and corrosion of electronic components, as well as the optimization of no-load and fault currents. It is also possible to use the device as a battery break-switch in order to detach from on-board power supply in case of transportation or seasonal shutdown of a car.

With the IPLU300N04S4-R7 of Infineon, 40 V MOSFETs of the latest generation of TO-leadless packages are applied which have been designed particularly for lowest on-state resistance (84 µOhm), highest ampacity (300 A DC) and best cooling (0.35 K/W). Despite increased performance data, the necessary footprint decreases by 30 % compared to D²PAK. Thus, very compact, power dissipation-efficient and robust high power solutions are possible, which – due to economic and technical restraints - could not be realized in such a way in the past.

The PCB Inlay technology of SCHWEIZER complements the remarkable semiconductor performance through outstanding ampacity and optimum heat spread, which is already established in the automotive area. By means of mature setup technologies, the additive thermal resistance within the PCB can be decreased to < 0.1 K/W. The on-state resistance amounts to 29 µOhm, in total resulting in a terminal-terminal on-state resistance of only 113 µOhm. Thus, the mentioned parameters significantly contribute to heat dissipation and to an efficient cooling of the semiconductor.

In an impressive way, the demonstrator proves the possibilities of today’s state-of-the art MOSFET and PCB technologies. When developing their systems, customers of both companies will largely benefit from the advantages of such a battery switch.

14.08.2013 | Sales and EBIT of SCHWEIZER in the first Half-Year 2013 fully in Line with Plan – Order Entry more than doubled

Schramberg, August 14, 2013 – Schweizer Electronic AG today announced its financial figures for the first half-year 2013. Within this period the company could achieve sales revenues of 48.9 (previous year 53.7) million Euro. The EBIT margin amounted to 7.8 % (previous year 6.9 %). Hence SCHWEIZER confirms its forecast for the current financial year, expecting sales for PCB to be over 90 million Euro and an EBIT margin of more than 5 %.

Within the first six months of the reporting period, numerous orders were acquired. With 58.6 million Euro (previous year 28.5 million Euro) order entries were thus doubled compared to the same period of the previous year. A continued robust automotive sector accounted for 76.5 % of new orders and thus proved to be stable with 44.7 million Euro (previous year 45.4 million Euro).The significant increase of new orders can be attributed to a recovery of the industry sector which – in the previous year - was characterized by order postponements and cancellations, particularly in solar electronics. By way of contrast, new orders from industry electronics (without solar) developed rather positively in the year 2013. These amounted to 10.3 million Euro (previous year 2.4 million Euro) and thus more than quadrupled.

„The sales share of technology products from our innovation focuses Power Electronics, Embedding and System Cost Reduction increased to 36.9 %", reports Dr. Marc Schweizer, CEO of the company. „This underlines the success of our strategy of developing the PCB from a pure connection carrier to a system."

In the first half-year, SCHWEIZER made an equity contribution of 2.2 million Euro to the innovations Joint Venture MEIKO-SCHWEIZER Electronics, Hong Kong, for the common production line in Hanoi/Vietnam. There, PCBs - dedicated to European customers in the automotive and industries sectors - will be manufactured.

This week, SCHWEIZER publishes its half-year financial report as per June 30, 2013, which will be available on http://www.schweizer.ag/en/investor-relations/financial-reports.html.

09.07.2013 | SCHWEIZER increases dividend by 17 %

Schramberg, July 9, 2013 – Shareholders present at Schweizer Electronic AG’s annual shareholders‘ meeting on July 5, 2013 followed the proposal submitted by the Executive and Supervisory Boards and agreed to pay a dividend of 0.55 Euro per share for the fiscal year 2012. This corresponds to a dividend ratio of 52 % based on the balance sheet profit. Thus shareholders benefit from the positive course of the business year and a dividend payment increased by 17 % compared to the previous year. Furthermore, SCHWEIZER will have employees participate in the company’s success and this way express their appreciation for the outstanding contribution. This payout, amounting to about 480,000 Euro, exceeds last year’s payment by 9 %.

Beyond the proposal for paying a dividend, the plenum, which gathered in Rottweil, agreed to all other proposals with a vast majority. As about 100 shareholders joined the meeting, 83 % of the share capital was represented. Additionally, about 70 guests were present.

In their speeches Dr. Marc Schweizer, CEO, and Marc Bunz, CFO, reported on a challeng-ing, however, with regards to the advancement of Schweizer Electronic AG, a successful fiscal year. SCHWEIZER was able to achieve net indebtedness around zero, an equity ratio of 57.1 %, an operative cash flow of 7.2 million Euro and a significant sales increase with innovative products for the segment automotive.

During the shareholders’ meeting, the Chief Executive Officer underlined that the company - despite continued pressure from competition and uncertain economic climate - looks op-timistically ahead. The reasoning behind is that SCHWEIZER expands its business in the growing regions. Furthermore, the company focusses on products and solutions that con-tribute to exploiting energy in a more efficient way and using savings potentials in con-sumption of fuel and energy as well as emissions. Challenges arising in the areas of mobility and energy efficiency will continue to be core of the divisions Electronic, Energy and Systems.

26.04.2013 | Noticeable upswing in new orders characterizes first quarter 2013

Schweizer Electronic AG today announced their financial figures for the first quarter 2013. Within this period, the company achieved sales revenues of 23.6 (previous year 28.4) million Euro. Thus, sales were 17 % lower with regards to the comparison period in 2012 and are in line with the company’s expectations. The result before interest and tax (EBIT) amounted to 1.3 million Euro (previous year 2.2 million Euro). EBIT margin was hence at 6 % (previous year 8 %).

With an order entry of 27.4 million Euro (previous year 22.7 million Euro) in the reporting period, the company registered an increase of 21 % compared to the previous year. This positive development was particularly shaped by customers from the automotive segment, who still acted cautiously in the previous year.

The equity ratio, too, developed positively and increased to 41.9 million Euro (Dec. 31, 2012: 40.9 million Euro) in the reporting period. The balance sheet total increased, compared to year’s end. This is particularly due to liabilities resulting from deliveries and services which grew by 1.9 million Euro to 5.4 million Euro. As a consequence, equity ratio slightly decreased to 56 % (Dec. 31, 2012: 57 %). Liabilities increased due to the noticeably raised sales and order entry in the first quarter.

„With regards to a declining European market and despite increased order entry we remain cautiously optimistic. In autumn last year, we have already initiated measures to stabilize our margin and have thus prepared ourselves for a difficult market environment. Beyond these measures we have accelerated the internationalisation of our division Electronic and will deploy the division Energy with a tapered business model. This way, SCHWEIZER will be increasingly represented in Asia and can profit from the growth in this region“, says Dr. Marc Schweizer, CEO of Schweizer Electronic AG.

Based on the insights at hand and the development of the European markets, the company expects sales for its PCB business of more than 90 million Euro as well as an EBIT margin of more than 5 % for the current fiscal year.

28.03.2013 | SCHWEIZER increases dividend proposal to 0.55 Euro per share

  • SCHWEIZER increases dividend proposal to 0.55 Euro per share
  • Sales and EBIT in line with expectations

Schramberg, March 28, 2013 – Schweizer Electronic AG today published results of its fiscal year 2012. Sales of 100.2 million Euro were within the guidance. In the past year, the company achieved earnings before interest and tax (EBIT) and before special effects of 5.2 million Euro (previous year 8.3 million Euro). Thus, the EBIT margin was 5.2 % (previous year 7.9 %).

Despite the economic uncertainties of the past year, SCHWEIZER succeeded in keeping its balance sheet structures on a very good level. At the end of the year 2012 equity amounted to 40.9 million Euro (previous year 42.0 million Euro). The equity ratio was 57.1 % (previous year 59.0 %). With 1.0 million Euro (previous year -1.1 million Euro) net debts were on a continuously low level.

The annual result of 0.7 million Euro was below the results of the previous year (6.5 million Euro). A devaluation of the share in Meiko Electronics by 2.8 million Euro burdened the financial result. This measure became necessary as a reduction of the evaluation the Meiko share at the capital market occurred. Thus the share in Meiko has been evaluated with 1.8 million Euro (previously 4.6 million Euro) in our financial assets.

In its past fiscal year the company already recorded 32 % of sales with products and solution from its innovation focuses Power Electronics, Embedding and System Cost Reduction. With an innovative portfolio SHWEIZER addresses applications that foster and support energy efficiency and mobility. The success of such solutions is manifested, among others, by sales with customers in the automotive industry of 65.3 million Euro in 2012, the highest in the company‘s history yet.

Consequently, shareholders will benefit from the sustained positive business results. Hence, the Executive Board and Supervisory Board will propose to the annual shareholder meeting on July 5, 2013 the distribution of a dividend of 0.55 Euro per share for the fiscal year. Based on the increasingly solid economic situation and a debt relief of the company to the largest extent, SCHWEIZER is able to increase the dividend for the second time in succession. According to the dividend policy of SCHWEIZER, the dividend is scaled on the basis of the freely available liquidity.

The company will publish results for the first quarter of the current fiscal year on April 26, 2013. The annual report for the year 2012 is available on http://www.schweizer.ag/de/investorrelations/finanzberichte.html . An English version of this report will be available soon.

2012

17.12.2012 | MEIKO and SCHWEIZER plan Joint Venture for production of PCBs in Vietnam

Singapore, December 17, 2012 – Schweizer Electronic Singapore Pte. Ltd., a member of the Schweizer Group, and Meiko Elec. Hong Kong Co. Ltd., a member of Meiko Electronics Co., Ltd., plan to found a Joint Venture for the purpose of producing Printed Circuit Boards (PCB) in Hanoi/Vietnam. This Joint Venture will be headquartered in Hong Kong and is planned to be officially set-up in the beginning of 2013. The start of production in Vietnam is scheduled for the third quarter 2013.

Both companies have agreed to build a common production line for the manufacturing of PCBs dedicated to European customers in the automotive and industry segments. It is planned to produce standard PCBs as well as solutions which reduce the overall cost of a system, such as FR4 Flex, and power electronics solutions, like the Inlay Board.

By joining forces, SCHWEIZER and MEIKO build upon their respective market accesses to Europe and Asia, their technology expertise and their production and process know how in order to offer a wide range of products to global customers. Accommodated in MEIKO's Vietnam plant based in Hanoi, the joint production line will benefit from the infrastructure of the existing factory. This facility produces PCBs since 2011 and currently employs about 1,200 people. The production will benefit from the favourable economic conditions that Vietnam offers in comparison to other established Asian countries.

"Following the foundation of our partnership with MEIKO in April 2009, a close and successful cooperation over the past three years and our mutual shareholding, it was a logical step to further build on the valuable experience of two powerful partners", says Dr. Marc Schweizer, designated Vice President of the Joint Venture and CEO of Schweizer Electronic AG. "While SCHWEIZER is a recognized R&D partner in Europe for innovative PCB solutions, particularly for the automotive and industry segments, MEIKO is an established enterprise offering volume production mainly for the automotive and mobile industries. Thus we are convinced that our customers will benefit from this strengthened partnership."

 

MEIKO Plant in Hanoi/Vietnam
MEIKO Plant in Hanoi/Vietnam

laser drilling machines in MEIKO Plant in Hanoi/Vietnam
laser drilling machines in MEIKO Plant in Hanoi/Vietnam

routing department in MEIKO Plant in Hanoi/Vietnam
routing department in MEIKO Plant in Hanoi/Vietnam

09.11.2012 | SCHWEIZER confirms forecast for Fiscal Year 2012

Schramberg, November 9, 2012 – Schweizer Electronic AG today announced their financial figures for the third quarter 2012. Within this period, the company achieved sales revenues of 23.8 (previous year 25.6) million Euro. Thus sales of the first nine months in 2012 were at 77.5 million Euro following 83.7 million Euro in the previous year and therefore 7 % below the comparison period.

In the third quarter the company achieved an EBIT of 1.2 (previous year 2.6) million Euro. This corresponds to an EBIT-Margin of 5 % for the third quarter. EBIT for the first nine months in 2012 was 5.0 (previous year 8.3) million Euro. Thus the EBIT-Margin of 6.4 % as per end of September was within the margin of 5 % to 7 % expected for the year 2012 .

With an order entry of 20.4 million Euro (previous year 17.6 million Euro) in the reporting period, the company registered an increase of 16 % compared to the previous year. Particularly with customers from the automotive segment SCHWEIZER could achieve successes: The quarterly sales for this segment increased – despite the currently critical situation in the automotive sector – to 15.4 million Euro, following 14.3 million Euro in the third quarter of 2011. The company attributes this positive development to its innovative solutions which allow its customers a reduction of the system cost.

Equity, too, developed positively and increased during the course of the current fiscal year by 2.0 million Euro to 44.0 million Euro (Dec. 31, 2011: 42.0 million Euro). As part of this development the equity ratio increased to 61 % (previous year 59 %).

 „In the light of aggravated market conditions we still have achieved good results and find ourselves within the scope of our forecast. In the areas of mobility and energy efficiency the positive trends continue to last. We therefore hold on to our strategic investments as only this way SCHWEIZER can expand its position in future. With a view to the expected development of the markets we have already decided for savings and initialized according measures. Thus we are prepared for a difficult market environment”, says Dr. Marc Schweizer, CEO of Schweizer Electronic AG.

For the current fiscal year SCHWEIZER confirms the forecast published in July: The company expects sales of 95 to 100 million Euro. For the division Electronic SCHWEIZER still projects an EBIT margin of 5 % to 7 %. Investments into its division Energy will burden the results with 1 % to 2 %.

24.08.2012 | 2012 Half-Year Sales of SCHWEIZER fully in Line with Plan

Schramberg, August 24, 2012 – Schweizer Electronic AG today announced their financial figures for the first half-year 2012. Within this period the company could achieve sales revenues of 53.7 (previous year 58.0) million Euro. The EBIT Margin amounted to 6.9 % (previous year 9.8 %). Hence SCHWEIZER confirms the revised forecast for the full financial year published on July 5 and, in view of the economic framework conditions, considers themselves well on target.

As expected, the essential customer segments within the division Electronic developed inconsistently. Again, it became apparent that the company’s increasingly diversified target markets tendentially lead to a higher balance of the business development. Thus sales revenues with automotive customers further increased, reaching 34.4 million Euro (previous year 30.2 million Euro) and therefore represented an increasing sales share of 64 % (previous year 52 %) in the first six months of the reporting year. A good growth could also be registered in the area of electromobility. SCHWEIZER supplied PCBs worth 3.7 million Euro for this market segment which corresponds to an increase by 41 % compared to the previous year. Accordingly already 7 % of SCHWEIZER’s sales were generated in the area of electromobility. The main reason for the decline in sales, however, was the lower business volume with customers acting in solar electronics in the course of the sustained weakness of the European photovoltaic market. Sales in this customer segment declined by 8.5 million Euro to 4.5 million Euro (previous year 13.0 million Euro), representing a sales share of 8 % (previous year 22 %).

Sales with industry customers increased by 5 % to 10.9 million Euro (previous year 10.4 million Euro), while sales with other customers declined 3.9 million Euro (previous year 4.4 million Euro).

In the first half year 2012 SCHWEIZER invested 6.3 million Euro (previous year 1.7 million Euro). The major share was the equity investment of 4.3 million Euro into Schweizer Pte. Ltd. in Singapore. Means invested resulted from the capital increase in 2010 that serve the activities for setting up the Energy division in Asia.

For the current financial year SCHWEIZER reinforces sales expectations of 95 to 100 million Euro. At the same time the company expects an EBIT Margin of 5 % to 7 % for the division Electronic. The investment into the division Energy will debit results with 1 % to 2 %.

This week SCHWEIZER publishes its Half Year Report for the year 2012. The report is available on www.schweizer.ag.

11.07.2012 | SCHWEIZER pays dividend of 0.47 Euro

Schramberg, July 11, 2012 – Shareholders present at Schweizer Electronic AG’s annual shareholders’ meeting on July 6, 2012 followed the proposal submitted by the Executive and Supervisory Boards and agreed to pay a dividend of 0.47 Euro per share for the fiscal year 2011, which corresponds to a dividend ratio of 35 % based on the unappropriated profit. Thus shareholders benefit from the positive course of the business year and a dividend payment which is 12 % higher compared to 2011. Based on the current share price of 11.85 Euro the dividend yield is about 4 %. Furthermore, SCHWEIZER will have employees participate in the company’s success and this way express their appreciation for the outstanding contribution. Hence, each staff member will receive 770 Euro on average.

Beyond the proposal for paying a dividend, the plenum, which gathered in Rottweil, agreed to all other proposals with a vast majority. Among these proposals was the election of Christoph Schweizer as a member of the Supervisory Board until the shareholders’ meeting in 2014. 114 shareholders joined the meeting, who represented 86 % of the share capital. Additionally, about 50 guests were present.

In their speeches Dr. Marc Schweizer, CEO, and Marc Bunz, CFO, reported on the second best year in the company’s history. They summarized the positive results of the year 2011, sales of which was at 105.4 million Euro and thus stable compared to the previous year, and the most important parameters. SCHWEIZER was able to achieve net indebtedness below zero, an equity ratio of 59 %, an operative cash flow of 11.2 million Euro and a significant sales increase with innovative products from their modular technology kit.

During the shareholders’ meeting, the Executive Board of Schweizer Electronic AG emphasized that – despite economic uncertainties - the company looks optimistically towards the future. The Board based this attitude on the fact that SCHWEIZER concentrates on growth markets with a considerable social significance, such as energy efficiency and mobility. Thus, the company will increasingly focus on their divisions Electronic, Energy and Systems in future. The division Tracing, which is based on a cooperation with Siemens Austria, will no longer be pursued strategically.

02.05.2012 | Sales in the first Quarter 2012 exceed expectations

Schramberg, May 2, 2012 – Schweizer Electronic AG started into the current fiscal year with robust results, despite the continuous weak solar market. In the first quarter 2012 sales volume amounted to 28.4 million Euro (previous year 29.1 million Euro) and thus exceeded the company’s expectations by about 10 %. Earnings before interest and tax (EBIT) accounted for 2.2 million Euro (previous year 2.7 million Euro). EBIT Margin was thus at 8 % (previous year 9 %).

Sales mainly split up into three customer segments. With 65 % (previous year 55 %) the automotive segment achieved an outstanding share in total sales and therefore accounted for the biggest growth, followed by the Industry segment with 19 % (previous year 16 %). Due to shifts in markets and further increasing price pressure the Solar segment only had a share of 10 % (previous year 22 %).

During the reporting period SCHWEIZER invested 5.2 million Euro. Thereof 4.3 million Euro have been allotted to the capital payment for the division Energy into SCHWEIZER Pte. Ltd. in Singapore and 0.9 million Euro to tangible assets of the division Electronic. Funds that have been paid for setting-up the division Energy had been acquired in the context of a capital increase at the end of 2010.

„After we succeeded in further improving the excellent structures of our balance sheet compared to the first quarter of the previous year, our balance sheet structures are mean-while on top level“, comments Dr. Marc Schweizer, CEO Schweizer Electronic AG. „As far as sales for the remaining three quarters of the current fiscal year are concerned, we assume that the market will shift, however, do expect sales in the range of between 105 and 110 million Euro with stable margin in the range of 8 – 10 % EBIT.“

27.04.2012 | SCHWEIZER increases dividend to 0,47 Euro per share

Schramberg, April 27, 2012 – Schweizer Electronic AG published results for its fiscal year 2011 on April 25. Again, the company could achieve record sales on previous year’s level of 105,4 million Euro. Book-to-Bill Ratio was at 1.0. Order intake amounted to 103.6 million Euro and order book amounted to 120 million Euro. Earnings before interest and tax (EBIT) and before special effects in fiscal year 2011 added up to 9.3 million Euro (previous year 13.0 million Euro). Thus, the EBIT margin was 8.8 % (previous year 12.3 %).

Again, SCHWEIZER succeeded in significantly improving the structures of its balance sheet in the past year. At the end of 2011 equity amounted to 42.0 million Euro (previous year 37.0 million Euro). Equity ratio improved to 59.0 % (previous year 50.5 %). Supported by the continuous profit situation, net debts were completely eliminated during the course of reporting period. Net assets amounted to 1.1 million Euro.

Consequently, shareholders benefit from the sustained positive business results. Hence, a dividend payout of 0.47 Euro per share (previous year 0.42 Euro) for the fiscal year 2011 will be proposed to the annual shareholders meeting on July 6, 2012.

The company will publish results for the first quarter of the current fiscal year on May 2, 2012. The annual report for the year 2011 is available on http://www.schweizer.ag/en/investor-relations/annual-report.html. An English version of this report will be available soon.

16.04.2012 | Schweizer Electronic extends Executive Board Contracts with Marc Bunz and Bernd Schweizer

Schramberg, April 16, 2012 – Last Friday the Supervisory Board of Schweizer Electronic AG has extended the existing contracts, valid until March  2013, with Executive Board members Marc Bunz and Bernd Schweizer for another five years until 2018. Marc Bunz is member of the Executive Board since April 1, 2010 and is responsible for Finance & Controlling, Information Systems, Purchasing and Investor Relations. Bernd Schweizer is in charge of Production, Supply Chain and Quality Control and is member of the Executive Board since April 1, 2008.

2011

29.11.2011 | SCHWEIZER welcomes Chinese Business Delegation in Schramberg – Agreement on intensifying the cooperation regarding Solar Projects

21.11.2011 | SCHWEIZER implements Diversification Strategy and starts Market Entry into Photovoltaic in Asia

11.11.2011 | Schweizer Electronic confirms result despite decrease in sales compared to Forecast

Schramberg, November 11, 2011 – Schweizer Electronic AG today announced their financial figures for the third quarter 2011. Within this period the company could achieve sales revenues of 25.6 (previous year 28.1) million Euro. Thus sales of the first three quarters 2011 were at 83.7 (previous year 78.8) million Euro and were therefore 6,2 % above the comparison period. Despite higher sales in comparison to the first nine months 2010 SCHWEIZER could not quite achieve their sales target.

In the third quarter the company achieved  - despite declining sales - an EBIT of 2.6 (previous year 4.1) million Euro. This corresponds to an EBIT-Margin of 10.2 % for the third quarter and was thus above expectations. EBIT for the first nine months in 2011 was 8.3 (previous year before special effects 9.9) million Euro. This decline is attributed to increasing cost for material and personnel. Consequently SCHWEIZER has lowered the number of temporary staff according to current requirements.

Since mid of 2009 SCHWEIZER was able to further improve their balance sheet structure. On September 30, 2011 equity capital was 42.7 million Euro and thus significantly above the previous year’s value of 26.5 million Euro. Accordingly, equity ratio increased to 55 % (previous year 41 %). Net gearing could be reduced to below zero. Therefore liquid assets were higher than all of SCHWEIZER’s interest-bearing liabilities at the end of the quarter.

„These indicators are an important basis for our financial stability, even in longer and more difficult economic cycles“, comments Dr. Marc Schweizer, CEO of Schweizer Electronic AG. „They equally open up an excellent starting basis for forward-looking targeted investments into innovations and improved technologies in the area of Printed Circuit Boards (PCB), the integration of components within the context of Schweizer Systems as well as our diversification with Schweizer Energy.“

SCHWEIZER continues their strategy and focuses further on the growth region Asia as a complement to Europe. The company mainly concentrates on the expansion of the PCB business as well the diversification by establishing new business areas. These include the creation of the business division Schweizer Systems, based on Embedding Technologies (integration of components into the PCB) and Schweizer Energy in the areas of energy creation, sales and storage in Asia.

Based on the continuing insecurities of the global economic development, the company adjusts its sales forecast for fiscal year 2011 and expects sales revenues on previous year‘s level of about 105 million Euro. Despite lower sales growth, SCHWEIZER confirms their EBIT forecast on a level of 10 million Euro to 11 million Euro for fiscal year 2011. This corresponds to an expected EBIT-margin of about 10 %, which is at the upper end of the forecast corridor. This takes into consideration all expenses for the development of the new business areas.

26.08.2011 | Half Year Financial Report 2011

You can find here the half year financial report 2011 (in German language only) as pdf-file.

26.08.2011 | SCHWEIZER continues Successful Course in the First Half Year

Schramberg, August 26, 2011 – In the first half year of 2011 Schweizer Electronic AG was able to continue the successful course of the previous year. After the past Fiscal Year had already been completed with record figures, sales in the first half of 2011 even exceeded expectations. In the first half year, sales volume increased to 58.0 million Euro (previous year 50.8 million Euro), a plus of 14 % compared to the corresponding first half of the previous year. EBITDA was at 8.2 million Euro and EBIT was at 5.7 million Euro. Based on these results, earnings per share were 1.27 Euro for the first half year 2011, an increase by 15 % compared the same period of last year, adjusted by special effects.

This increase resulted mainly from customers in the automotive and industry segments. With sales of 30.2 million Euro (previous year 25.2 million Euro), the automotive segment represents 52 % (previous year 50 %) of total sales of the first half year. This success was primarily achieved through SCHWEIZER’s innovative solutions within the fields of System Cost Reduction and Power Electronics which precisely meet requirements of the automotive industry. The industry segment, too, grew disproportionately in the first half year 2011. Sales of 10.4 million Euro (previous year 5.8 million Euro) was supported by a positive market development in the field of control electronics. In the first months of 2011, the market for photovoltaic was characterized by insecurity and weak business volumes on our customers’ side. For SCHWEIZER this lead to noticeable declines in sales in this customer segment. Whereas in the first half year 2010 sales of 15.9 million Euro could be achieved, sales in the first half year of 2011 were reduced by 18 % to 13.0 million Euro.

In the past months the company’s financial stability was further significantly improved and the balance sheet grounds on a solid foundation. This is sustained by an equity ratio of more than 50 % and a net gearing of smaller 5 %. The financial situation allows for a well-resourced entrepreneurial room to move and is the basis for SCHWEIZER’s diversification strategy.

The company strategy is focused on the Asian growth region as a complement to its European business. Furthermore, the concentration on the dynamic topics mobility and energy efficiency in the sales segments Automotive, Solar and Industry opens up disproportional growth opportunities. In parallel, SCHWEIZER accordingly and consistently gears its portfolio to mastering the challenges of its target markets by offering a range of technological possibilities, which can be combined with one another in a modular manner. The implementation of this strategy is based on the company's structuring into four business segments. The existing segments of PCBs and Tracing are to be expanded. The Systems and Energy segments are being established and their structure will contribute to the complementary enhancement of the existing business areas. The creation of these new segments represents a first step in the tactical implementation of SCHWEIZER's diversification strategy. In the context of this diversification strategy, the company announced the foundation of Schweizer Energy Pte. Ltd. in Singapore in May. This new company is at the centre of developing Asian markets in the field of energy generation and energy storage.

Globally, first insecurities caused by the debt crises are looming ahead. Nevertheless the company confirms its expectations for the Fiscal Year 2011 for a sales increase of up to 110 to 120 million Euro and an EBIT-Margin of 9 % to 10 %.

This week SCHWEIZER publishes its Half Year Report for the year 2011. The report is available on www.schweizer.ag.

22.07.2011 | SCHWEIZER invests 10 million Euro into its site in Schramberg

Schramberg, July 22, 2011 – Schweizer Electronic AG’s investment volume in its site in Schramberg amounts to about 10 million Euro in the years 2010 and 2011. In its fiscal year 2011 alone, the company will invest nearly 8 million Euro which will be used for expanding equipment that renders production processes more efficiently and supports the introduction of latest technologies.

In the past years SCHWEIZER has continuously advanced the development of innovations in the product areas Power Electronics, Embedding and System Cost Reduction. By doing so, the company has geared itself up for mastering its customers’ current and future requirements for technologically premium PCBs.

Beyond the acquisition of a nickel-gold and a nickel-palladium-gold line, which serves for innovative surface finishing, SCHWEIZER has set-up further capacities for milling and depth milling. Only recently an Interposer-Pick-and-Place-System has been put into operation in order to fully automatise Embedding manufacturing. Additionally a new HDI Laser will be running soon. Beyond, a new Masslam Press Centre is near completion.

„We want to be leading in innovative technologies in future, too, and by investing, we are creating the necessary conditions. Our objective is to realize systems via our PCBs that offer more comfort, increase efficiency, use less fuel and cause less CO2 emissions“, explains Dr. Marc Schweizer, CEO of Schweizer Electronic AG. „With good reason our customers expect more than PCBs from us, thus in the meantime our offer encompasses complex systems for applications, that are for example being utilised in the growing area of E-Mobility. Any finally our investment into our site in Schramberg serves to protect and create job in our region. In the past 18 months we were able to create more than 120 new jobs in Germany.“

04.07.2011 | SCHWEIZER pays Dividend of 0.42 Euro

Schramberg, July 4, 2011 – Shareholders present at Schweizer Electronic AG’s annual shareholders’ meeting on July 1, 2011 followed the proposal submitted by the Executive and Supervisory Boards and agreed to pay a dividend of 0.42 Euro per share for the fiscal year 2010. Thus shareholders benefit from the positive course of the business year, which constitutes a starting point for a continuous dividend payment in the coming years.

Beyond the proposal for paying a dividend, the plenum who gathered in Rottweil and who was enlarged by about 90 guests, agreed to all other proposals with a majority of 96 per cent each. With about 110 shareholders, 75 per cent of the share capital was present.

In their speeches Dr. Marc Schweizer, CEO, and Marc Bunz, CFO, reported on a record year in the company’s history. In 2010 the annual turnover increased by 60 per cent to more than 105 Million Euro and with 16,9 Million. Euro EBIT was higher than forecast. SCHWEIZER’s share price increased by 352 % from 5.20 Euro to 23.50 Euro during the course of the year. In the first quarter of 2011, too, SCHWEIZER  succeeded in unabatedly continuing the dynamic growth that was started in the past year.

Based on a solid foundation, the company expects further growth. Furthermore, the Executive Board illustrated the focal points of the company’s strategy. It is planned to further expand operations for PCBs and Tracing as well as strategically diversifying the company by additional areas of business. These areas include the division Systems, focussing on the optimisation of drive controls through embedding solutions as well as the creation of the division Energy. For this promising area CEO Marc Schweizer even presented a prototype of a thin-layer battery the size of a finger nail. Together with a partner the innovative Swabian company is currently working on the further development towards series maturity for this product. The partnering company is developing the necessary production equipment and has exclusively secured the battery technology, developed over the past 10 years by a renowned American research company.

25.05.2011 | Schweizer Energy Pte. Ltd. founded

Schramberg, May 25, 2011 – Schweizer Electronic AG today announced the foundation of Schweizer Energy Pte. Ltd. based in Singapore. The foundation of this entity, a 100% daughter company of Schweizer Electronic AG, is part of the already communicated company strategy, focussing on the growth region Asia as a supplement to Europe and on the area of renewable energy. The newly created division Energy constitutes a complimentary expansion of the existing divisions PCB and Tracing.

„With Singapore, the economic hub for Asia, we have chosen an ideal location for exploiting the Asian markets“, says Dr. Marc Schweizer, CEO of Schweizer Electronic AG and now also President of Schweizer Energy Pte. Ltd. „Furthermore, process and manufacturing know-how for products and services in the area of energy is similar to the one applied to manufacturing of PCBs“, Schweizer explains. As the world’s biggest PCB manufacturer for the solar industry the company draws upon comprehensive sales experience and market knowledge.

02.05.2011 | SCHWEIZER successfully started into the Fiscal Year 2011

Schramberg, May 2, 2011 – In the first quarter 2011 Schweizer Electronic AG also succeeded in unabatedly continuing the dynamic growth they began in the past year. After the past Fiscal Year had already been completed with record figures, sales in the first quarter of 2011 even significantly exceeded expectations. With Sales of 29.1 (previous year. 23.9) mio. Euro, a plus of 22 % compared to the corresponding quarter of the previ-ous year, the company impressively underlines this.

Sales generated via the partner network could also be significantly increased and were, with 2.7 mio. Euro, fourfold higher compared to the corresponding quarter of the previous year. This is particularly impressive against the background of the catastrophe in Japan as the strategic partner Meiko Electronics Co., Ltd. had been affected by the impacts of the Tsunami and the nuclear catastrophe. As SCHWEIZER is exclusively being served by the Chinese factories of MEIKO, this does not have any effect on the operational cooperation between both companies.

Following temporary supply shortages in the previous year, SCHWEIZER’s Management strongly focussed on the improvement of delivery reliability for customers in the past months. Investments in bottleneck areas as well as the introduction of an optimized production planning system significantly improved delivery reliability. For orders which are extremely urgent the company introduced a Fast Path Lane.

In the meantime SCHWEIZER comes up with an excellent structure of the balance sheet. The ongoing profit situation is accompanied by an enhanced debt relief of the company. Net Gearing only amounted to 7 % of own capital. Equity ratio is at 50 % (previous year 30 %). Total property of SCHWEIZER has grown to 78.8 (previous year 54.2) mio. Euro.

Despite pending challenges the company looks positively at the development of the current Fiscal Year. SCHWEIZER encounters possible uncertainties with regards to a truly self-supporting global upswing, recent incidents in North Africa and Japan and further cost pressure through increasing prices on the procurement side with a continuously low fixed cost base and flexible cost structures.

„We are in good shape and have the skills as well as the expertise to also continue our successful journey in a slowed-down growth environment.“, says Dr. Marc Schweizer, CEO of Schweizer Electronic AG.

Against this background the company expects a sales increase to up to 110 to 120 mio. Euro with an EBIT margin of 9 % to 10 % (Q1/2011: 9%) for Fiscal Year 2011. Thus the predicted sales correspond to a growth of 5 % to 15 % compared to the previous year.

Last week SCHWEIZER published their annual report for the Fiscal Year 2010.

01.04.2011 | Nicolas Schweizer starts as Chief Human Resources Officer with Schweizer Electronic AG

Schramberg, April 1, 2011 – Nicolas-Fabian Schweizer (36), qualified lawyer, today resumes his position as Chief Human Resources Officer with Schweizer Electronic AG as of today. He had been appointed by the Supervisory Board on July 27. In his new function he is responsible Human Resources and Legal.

Nicolas-Fabian Schweizer comes with long-term international experience in the areas of Law, Human Resources and organisational development. He completed an education in Law in Germany, Switzerland and the U.S.A. Following positions as a lawyer, legal counsel and Director Human Resources he was recently member of the European Human Resources Management of British American Tobacco Group.

07.02.2011 | Schweizer Electronic AG with Record Year: Expectations exceeded

Schweizer Electronic AG with Record Year: Expectations exceeded

  • Annual Sales increased by 60 percent to 105.4 Million Euro
  • Earnings before Interest and Tax with 16,9 Mio. Euro above Forecast
  • Employees participate in Company Success
  • Solid Base – further Growth expected in 2011



Schramberg, February 7, 2011 – Schweizer Electronic AG, No. 3 of Europe’s PCB manufacturers, will close the Financial Year 2010 with the highest sales in its 161 year-old company history. Based on preliminary figures, the technology company achieved sales of 105.4 Mio. Euro (previous year 65.8 Mio. Euro) in 2010, thus sales were 60% abo-ve those in 2009.

CEO Dr. Marc Schweizer considers the chosen company strategy confirmed: „ Our inno-vation focus meets with high interest on our customers’ side. Schweizer Electronic is a High-Tech-House residing on a very solid base “.

The profit situation of Schweizer Electronic, too, has significantly improved. Earnings be-fore Interest and Tax (EBIT) were with 16.9 Mio. Euro and a margin of 16 % clearly above target. Adjusted by special items, EBIT was at 13.1 Mio. Euro respectively at 12.5 %. „Based on the excellent results in 2010, we will propose to the Supervisory Board to distribute a dividend of 0.42 Euro per share “, says Marc Bunz, CFO of Schweizer Elec-tronic.

The final figures will be published on April 27, 2011 and explained during an investor and press conference on May 4, 2011.

The company profits from its strategic positioning and the growth in Asia which creates and secures jobs in Germany. Consequently Schweizer’s number of employees increased – compared to a low in mid 2009 – within about one and a half years by 103 to 741 persons employed.

Following the very positive development, employees - who made concessions in the past years – will participate in the company’s success. This includes the reactivation of various income components. Furthermore, a salary increase of 3%, originally planned for spring 2011, has been pulled forward to January 1, 2011. For the staff this is the highest income improvement in the past 8 years.

Furthermore, Schweizer Electronic has increased its expenditure for research, develop-ment and investments by 56%. Spending was at about 4.1 Million Euro (previous year 2.6 Million EUR) and will serve the enlargement of the product portfolio, the optimization of production and the strengthening of the site Schramberg.

For 2011 the company anticipates a continuation of the global upswing which might, however, lose is dynamics. With a view to the market segments, an increase of sales revenues of between 5 % and 15 % is expected for Fiscal Year 2011. This forecast also draws on the fact that Schweizer starts the Fiscal Year 2011 with orders in hand of more than 120 Mio Euro.

Schweizer’s management does, however, not intend to rest on their last year’s successes. The „Turnarounder of the Year 2010“ is currently reviewing options to diversify into new business areas.

2010

12.11.2010 | Schweizer Electronic AG successful also in 3rd Quarter 2010

Schweizer Electronic AG successful also in 3rd Quarter 2010
Forecast for current Fiscal Year again increased:
EBIT of above 10 % for 2010 expected
Outlook for 2011 rated stable and further on positively


Highlights of Third Quarter

  • Mutual shareholding Contract with Meiko Electronics signed
  • Expansion of flexible production capacities results in turnover of 28.1 Mio. EUR, an increase by 49 % compared to 3rd Quarter of previous year
  • EBIT Margin increases to 14% in 3rd Quarter
  • Operational revenues secure robust balance sheet structures: equity ratio in September above 41 %
  • Stock Exchange rewards positive development: share price increase by 36 % in 3rd quarter

Please find here the press release as pdf-file

28.10.2010 | Schweizer Electronic AG appointed "Turnarounder of the Year 2010"

Rising like a Phoenix - Schweizer Electronic AG appointed "Turnarounder of the Year 2010" Schramberg, October 28, 2010 – During a festive ceremony yesterday in Bertelsmann’s Berlin based representative office Schweizer Electronic AG’s CEO, Dr. Marc Schweizer received the award "Turnarounder of the Year 2010".

Schweizer Electronic AG was nominated in the category companies with up to 1,000 employees as they succeeded in being back in the black after a perennial crisis. Literally rising like a phoenix the company was consequently resurrected based on an adjusted strategy, after a fire in 2005 burnt down a big part of the production areas. The years of reconstruction were marked by severe cuts: the close-down of a second manufacturing site, the reduction of workforce by a one-fifth, the optimization of business and production processes and the termination of unprofitable business areas. The economic crisis hit the company in the middle of the restructuring process, leading to a loss of six million Euro in the first half of 2009. The turnaround eventually began to show at the end of last year, supported by a consistent implementation of the company strategy, a close cooperation with banks and the foundation of a partner network.

„I accept this award on behalf of our employees“, says Dr. Marc Schweizer. „We express a big ‘Thank You’ as this prize is a result of their engagement, creativity and loyalty, particularly during the years of crises. Economic success can only be achieved if everyone contributes to it and our staff proved this in an impressive way. Given our improved economic situation, we will ultimately be able to reward our workforce. Our appreciation also includes our customers, suppliers, banks and partners for their long-term loyalty and successful cooperation.“

Together with his fellow board members Marc Bunz (CFO) and Bernd Schweizer (COO) Dr. Marc Schweizer is currently planning further strategic steps within the company’s core business printed circuit boards (PCB), but also towards diversification and optimization of the value chain. Corresponding decisions and measures are expected to being taken within the coming quarters.

The award „Turnarounder of the Year“ is granted by auditing company BDO and the business magazine ‚impulse’ and honours the performance of German companies whose management and staff succeeded in maintaining company and jobs despite a difficult economic situation. The prize is awarded in three company size categories, i.e. up to 500, up to 1,000 and more than 1,000 employees.

In July Schweizer Electronic AG reported in their mid-year financial report a significant increase in revenues by 80% and is expecting a turnover of about 90 to 100 million Euro for 2010. This successful growth is also based on a cooperation with their partner Meiko Electronics. Within the last two years the company’s share price increased from 2 Euro to a current price of around 26 Euro.

21.09.2010 | Press Release Schweizer Electronic AG and Meiko Electronics Co., Ltd. conclude contract concerning mutual shareholding, 21 September 2010

Schweizer Electronic AG and Meiko Electronics Co., Ltd. conclude contract concerning mutual
shareholding
 
Following the strategic alliance with regards to customer support and production that Schweizer Electronic AG and Meiko Electronics Co., Ltd., Japan announced in April 2009, both companies today emphasize the stability and the sustainability of this cooperation’s strategic relevance by concluding a contract concerning mutual shareholding. On September 21, 2010 Schweizer Electronic AG signed a share purchase agreement with Meiko Electronics Co., Ltd., Japan. By this share purchase agreement Schweizer Electronic AG sells to Meiko Electronics Co., Ltd. 180,000 own shares of Schweizer Electronic AG which had been purchased in accordance with the resolution passed by the shareholders’ meeting on June 27, 2008. At the same time Schweizer Electronic AG concluded an agreement with Meiko Electronics Co., Ltd. according to which Schweizer Electronic AG purchases 313,600 shares of Meiko Electronics Co., Ltd. The volume of this transaction amounts to about 4.7 Mio. Euro. As the volumes are equating, no outflow or inflow of liquidity are resulting from this transaction.

27.07.2010 | Press Release Schweizer Electronic AG Appoints New Chief Human Resources Officer (CHRO) , 27 July 2010

Schweizer Electronic AG Appoints New Chief Human Resources Officer (CHRO)  
 
The Supervisory Board of Schweizer Electronic AG, Schramberg, decided on 27/07/2010 to
appoint Nicolas-Fabian Schweizer (35), graduate in law, Chief Human Resources Officer
(CHRO) of the company effective 01/04/2011 for a term of 5 years as part of the strategic
corporate development program.

02.07.2010 | Press Release on the Shareholders' Meeting of Schweizer Electronic AG, 02 July 2010

Around 200 shareholders and guests attended this year’s Shareholders’ Meeting of Schweizer Electronic AG. Approximately 78% of the stock capital were represented. All resolutions proposed by the Management were adopted unanimously or by a large majority of votes.

21.01.2010 | Press Release 21.01.2010

Information for our shareholders for the 4th quarter 2009 Highlights for the fourth quarter: Order books full - production capacity fully utilised / Trend reversal more significant than in the 3rd quarter - 27 % increase in sales year on year - sales guidance exceeded / Turnaround stabilised - clearly positive results with an EBIT margin of 7% although 4th quarter historically the weakest quarter for sales in the industry / Vacant plant in Dunningen sold - additional cash inflow improves balance sheet structures / Orders on hand of EUR 63,9 mln as at 31.12.2009 secures capacity utilisation until mid-2010 (prior year: EUR 47.1 mln)

2009

19.02.2009 | Press Release 19 February, 2009

Schweizer shows considerable improvement in 2008
Successful turnaround 
Robust balance sheet structure

20.01.2009 | Press Release 20 January, 2009

(German language only)

2008

04.12.2008 | Press Release of December 4, 2008

(German language only)

29.10.2008 | Press release of October 29, 2008

Schweizer Electronic exceeds 3rd quarter forecast (German language only).

27.06.2008 | Pressrelease dated 2008-06-27

Annual general meeting of Schweizer Electronic AG

2007

31.08.2007 | Financial Press release dated 2007-08-31

SCHWEIZER ELECTRONIC AG, Schramberg - Halbjahresfinanzbericht 2007 (German language only)

16.03.2007 | Press release 2/2007 dated 16.03.2007

SCHWEIZER ELECTRONIC AG, Schramberg - Vorläufiges Jahresergebnis 2006 (German language only)

19.01.2007 | Press release 1/2007 dated 01/19/2007

SCHWEIZER ELECTRONIC AG, Schramberg

- Reconstruction on track
- Turnover on level as pervious year
(German language only)